How do the finite-size particles modify the drag in Taylor–Couette turbulent flow
- 22 February 2022
- journal article
- research article
- Published by Cambridge University Press (CUP) in Journal of Fluid Mechanics
- Vol. 937, A15
Abstract
We experimentally investigate the drag modification by neutrally buoyant finite-size particles with various aspect ratios in a Taylor–Couette (TC) turbulent flow. The current Reynolds number, $Re$ , ranges from $6.5\times 10^3$ to $2.6\times 10^4$ , and the particle volume fraction, $\varPhi$ , is up to $10\,\%$ . Particles with three kinds of aspect ratio, $\lambda$ , are used: $\lambda =1/3$ (oblate), $\lambda =1$ (spherical) and $\lambda =3$ (prolate). Unlike the case of bubbly TC flow (van Gils et al., J. Fluid Mech., vol. 722, 2013, pp. 317–347; Verschoof et al., Phys. Rev. Lett., vol. 117, issue 10, 2016, p. 104502), we find that the suspended finite-size particles increase the drag of the TC system regardless of their aspect ratios. The overall drag of the system increases with increasing $Re$ , which is consistent with the literature. In addition, the normalized friction coefficient, $c_{f,\varPhi }/c_{f,\varPhi =0}$ , decreases with increasing $Re$ , the reason could be that in the current low volume fractions the turbulent stress becomes dominant at higher $Re$ . The particle distributions along the radial direction of the system are obtained by performing optical measurements at $\varPhi =0.5\,\%$ and $\varPhi = 2\,\%$ . As $Re$ increases, the particles distribute more evenly in the entire system, which results from both the greater turbulence intensity and the more pronounced finite-size effects of the particles at higher $Re$ . Moreover, it is found that the variation of the particle aspect ratios leads to different particle collective effects. The suspended spherical particles, which tend to cluster near the walls and form a particle layer, significantly affect the boundary layer and result in maximum drag modification. The minimal drag modification is found in the oblate case, where the particles preferentially cluster in the bulk region, and, thus, the particle layer is absent. Based on the optical measurement results, it can be concluded that, in the low volume fraction ranges ( $\varPhi =0.5\,\%$ and $\varPhi = 2\,\%$ here), the larger drag modification is connected to the near-wall particle clustering. The present findings suggest that the particle shape plays a significant role in drag modification, and the collective behaviours of rigid particles provide clues to understand the bubbly drag reduction.
Keywords
All Related Versions
Funding Information
- National Natural Science Foundation of China (11988102)
- National Natural Science Foundation of China (91852202)
This publication has 64 references indexed in Scilit:
- Shear Thickening in Non-Brownian Suspensions: An Excluded Volume EffectPhysical Review Letters, 2013
- Lagrangian Properties of Particles in TurbulenceAnnual Review of Fluid Mechanics, 2009
- Interface-resolved direct numerical simulation of vertical particulate channel flow in the turbulent regimePhysics of Fluids, 2008
- Bubbly Turbulent Drag Reduction Is a Boundary Layer EffectPhysical Review Letters, 2007
- Bubble friction drag reduction in a high-Reynolds-number flat-plate turbulent boundary layerJournal of Fluid Mechanics, 2006
- Drag Reduction in Bubbly Taylor-Couette TurbulencePhysical Review Letters, 2005
- Revisiting the 1954 suspension experiments of R. A. BagnoldJournal of Fluid Mechanics, 2002
- Scaling of global momentum transport in Taylor-Couette and pipe flowThe European Physical Journal B, 2000
- On predicting particle-laden turbulent flowsFlow, Turbulence and Combustion, 1994
- Experiments on a gravity-free dispersion of large solid spheres in a Newtonian fluid under shearProceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 1954