A Sealed-Off Pseudospark Switch With Nanosecond Stability of Triggering
- 26 July 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (9) , 4692-4697
Abstract
This article describes the modified version of the commercially produced pseudospark switch TPI1-10k/50 (pulsed current-10 kA and anode voltage-up to 50 kV) and the results of testing. The main idea of the modification was to use the high-voltage electrode system of this switch but to incorporate the novel trigger unit in the main cathode cavity. This unit uses the auxiliary glow discharge with hollow cathode and hollow anode. The modified switch is intentionally developed for parallel operation of a large number of the switches to a common load. In such conditions, the nanosecond triggering stability of the switches is required. The results of tests demonstrate that the minimum delay time of triggering (the time interval between the instant of arrival of the trigger pulse and the instant of starting the main discharge current) amounts to 80 ns with a jitter of 3 ns. At a decreased hydrogen pressure, the delay time is not increased essentially and amounts to 105 ns with a jitter of 6 ns.Keywords
Funding Information
- Russian Science Foundation (19-19-00123)
This publication has 26 references indexed in Scilit:
- A pulse power supply of the linear induction acceleratorInstruments and Experimental Techniques, 2012
- Sealed-off pseudospark switches for pulsed power applications (current status and prospects)IEEE Transactions on Plasma Science, 2001
- Low-voltage triggering for a pseudospark switch with an auxiliary glow dischargeIEEE Transactions on Plasma Science, 2001
- Electrode phenomena and lifetime considerations in a radial multichannel pseudospark switchIEEE Transactions on Plasma Science, 2000
- Scientific and technological progress of pseudospark devicesIEEE Transactions on Plasma Science, 1999
- Triggering a radial multichannel pseudospark switch using electrons emitted from material with high dielectric constantApplied Physics Letters, 1997
- Trigger devices for pseudospark switchesIEEE Transactions on Plasma Science, 1995
- Investigation of the effect of blocking potential on the static breakdown voltage and discharge initiation in pseudospark switchesIEEE Transactions on Plasma Science, 1995
- High-repetition rate sealed-off pseudospark switches for pulsed modulatorsIEEE Transactions on Electron Devices, 1991
- The fundamentals of the pseudospark and its applicationsIEEE Transactions on Plasma Science, 1989