Flexural and cracking behavior of corroded RC continuous beams strengthened with energized C‐FRCM system
- 6 December 2023
- journal article
- research article
- Published by Wiley in Structural Concrete
- Vol. 25 (1) , 659-676
Abstract
This paper presents an experimental investigation into the flexural and cracking behavior of corroded reinforced concrete continuous beams with 11‐month wet–dry cycles strengthened by anodic polarized carbon‐fabric‐reinforced cementitious matrix (C‐FRCM) plates. The failure modes and flexural bearing capacities were discussed. The influences of the layer of carbon fabric mesh and complete carbon fiber‐reinforced polymer (CFRP) wrapping as end anchorage on the strengthening effectiveness were explored. The complete crack development patterns were captured by a digital image correlation system, and the results showed that the C‐FRCM system can provide satisfactory crack width control, as proved by the reduced crack spacing and the maximum crack width. The flexural capacities of the strengthened beams were effectively enhanced and the debonding failure can be eliminated through complete CFRP wrappings. Moreover, the design recommendations were proposed based on the estimation of the crack development as per related design guidelines.Keywords
Funding Information
- National Natural Science Foundation of China
This publication has 32 references indexed in Scilit:
- Light-weight cementitious conductive anode for impressed current cathodic protection of steel reinforced concrete applicationConstruction and Building Materials, 2014
- Electrical and Mechanical Performance of Carbon Fiber-Reinforced Polymer Used as the Impressed Current Anode MaterialMaterials, 2014
- Dual function carbon fibre fabric strengthening and impressed current cathodic protection (ICCP) anode for reinforced concrete structuresMaterials and Structures, 2014
- Assessing the long term benefits of Impressed Current Cathodic ProtectionCorrosion Science, 2010
- Offshore sand for reinforced concreteConstruction and Building Materials, 2008
- Corrosion protection system for construction and rehabilitation of reinforced concrete bridgesInternational Journal of Materials and Product Technology, 2005
- Effectiveness of a conductive cementitious mortar anode for cathodic protection of steel in concreteCement and Concrete Research, 2004
- Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art reviewProceedings of the Institution of Civil Engineers - Structures and Buildings, 2003
- Specimen shape and size effect on the compressive strength of higher strength concreteCement and Concrete Research, 1997
- Cathodic protection and cathodic preventionConstruction and Building Materials, 1996