Fabrication of microchannels in lithium tantalate by selective etching of structures inscribed with a femtosecond laser
Open Access
- 17 June 2025
- journal article
- Published by IOP Publishing in Journal of Physics: Photonics
- Vol. 7 (3) , 035014
Abstract
Selective etching of material areas modified by femtosecond laser pulses in the volume of lithium tantalate has been applied to produce hollow microchannels. In a fully monolithic approach, microchannels up to 2.5 mm long with cross sections of 2.5 µm × 20 µm were etched into the crystal volume at a depth of 430 µm. The influence of the laser repetition rate, the pulse energy and the writing speed on the etching time and the etching selectivity was investigated as part of a systematic study. Characteristic process parameters, i.e. selectivity and diffusion coefficient were determined by fitting the etch depth versus time using a superdiffusion model. The obtained parameters are suitable for predicting the results of selective etching for certain process parameters, and thus enable the process to be controlled. A similar study was carried out in sapphire for comparison purposes.Keywords
This publication has 36 references indexed in Scilit:
- Laser Lithography of Monolithically‐Integrated Multi‐Level Microchannels in SiliconAdvanced Materials Technologies, 2024
- Photo‐Induced Electric Field Effects on Water Droplets Generated in a LiNbO3 Opto‐Microfluidic PlatformAdvanced Materials Interfaces, 2024
- In-chip microstructures and photonic devices fabricated by nonlinear laser lithography deep inside siliconNature Photonics, 2017
- Ultrafast laser processing of materials: from science to industryLight: Science & Applications, 2016
- Research of abrasive embedment-free lapping on soft-brittle lithium niobate waferThe International Journal of Advanced Manufacturing Technology, 2016
- First-principles investigations of the physical properties of lithium niobate and lithium tantalatePhysica B: Condensed Matter, 2013
- Femtosecond laser micromachining in transparent materialsNature Photonics, 2008
- Etching study of poled lithium tantalate crystal using wet etching technique with ultrasonic assistanceOptical Materials, 2008
- Integration of a surface acoustic wave biosensor in a microfluidic polymer chipBiosensors and Bioelectronics, 2006
- Control over the Crystalline State of SapphireAdvanced Materials, 2006