Sintering of Ti(C,N)-Based Cermets: The Role of Compaction
- 1 July 1995
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 10 (4) , 773-783
Abstract
Different compaction processes were employed in studying the effect of green state on the sintering of TiC-TiN-Ni-Mo2C and Ti(C0.3N0.)-Ni-Mo2C cermets. Specimens were uniaxially pressed and some being subsequently compacted by cold isostatic pressing. Liquid and solid phase sintering was carried out in nitrogen atmosphere. Green state porosity, pore size distributions, as sintered morphologies, micro-hardness and microstructural development were characterized. Mercury porosimetry measurements indicate that with increasing compacting pressure, large pores are eliminated and the pore size distribution curves shift towards smaller pores. Higher compaction load also leads to decrease in average pore size and a wider pore size distribution. It was found that the Ti(CN)-based cermets are superior than the (TiC-TiN)-based cermet. Cermets with carbowax additives are better sintered than those without the wax. The two-stage consolidation (diepressing + CIP) results in better sintering properties than die-pressing alone.Keywords
This publication has 2 references indexed in Scilit:
- The sinterability of nitrogen contained TiC-Mo2C-Ni cermet.Journal of the Japan Society of Powder and Powder Metallurgy, 1989
- Microstructure and Mechanical Properties of Titanium-Carbonitride Base Cermets1988