Exploration of morphology evolution of the inclusions in Mg-treated 16MnCrS5 steel
Authors:
- 4 December 2017
- journal article
- research article
- Published by SAGE Publications in Ironmaking & Steelmaking: Processes, Products and Applications
- Vol. 46 (6) , 564-573
Abstract
To elucidate the morphology evolution of the inclusions in 16MnCrS5 steel with various masses of Mg addition, the experiments and thermodynamics were carried out with a high-temperature tube electric resistance furnace and FactSage software, respectively. The evolutions of the inclusions after the smelting and hot-processing were described. The experimental results show that with Mg addition of 35–42 ppm, many spindle and spherical inclusions with the size below 20 μm appeared, whereas the long-strip inclusions above 20 μm disappeared; after hot-processing, particularly, the h value was above 50%, beneficial to obtaining more spindle inclusions, and most spherical inclusions at 35 ppm were also obtained. The thermodynamics show that with Mg mass between 0.349 and 6.076 ppm, Al2O3 was easily converted to MgO·Al2O3, whereas above 6.076 ppm, Mg was directly converted to form MgO; above more, MgS coexisted with MgO.Keywords
Funding Information
- Foundation of the State Key Laboratory of Development and Application Technology of Automotive Steel
- National Natural Science Foundation of China (51671124, 51474142)
This publication has 18 references indexed in Scilit:
- A comparison of the effects of traditional shot peening and micro-shot peening on the scuffing resistance of carburized and quenched gear steelWear, 2016
- Influence of different combined severe shot peening and laser surface melting treatments on the fatigue performance of 20CrMnTi steel gearMaterials Science and Engineering: A, 2016
- The Effect of Different Non-Metallic Inclusions on the Machinability of SteelsMaterials, 2015
- Effect of Magnesium on Evolution of Oxide and Sulphide in Liquid Iron at 1873 KJournal of Iron and Steel Research International, 2014
- Effects of Non-metallic Inclusions on Machinability of Free-Cutting Steels Investigated by Nano-Indentation MeasurementsMetallurgical and Materials Transactions A, 2014
- Modification of Inclusions in Liquid Iron by Mg TreatmentJournal of Iron and Steel Research International, 2014
- Tribological failure analysis of gear contacts of Exciter Sieve gear boxesEngineering Failure Analysis, 2014
- Effect of Modification Treatment on Inclusions in 430 Stainless Steel by Mg-Al AlloysJournal of Iron and Steel Research International, 2013
- Behavior of Inclusions in Deoxidation Process of Molten Steel with in Situ Produced Mg VaporISIJ International, 2007
- Application of the weakest‐link concept to the endurance limit of notched and multiaxially loaded specimens of carburized steel 16MnCrS5Fatigue & Fracture of Engineering Materials & Structures, 2005