Preparation, Microstructure, and Mechanical Properties of TiB 2 Using Ti 3 AlC 2 as a Sintering Aid
Authors:
- 9 May 2012
- journal article
- research article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 95 (6) , 2028-2034
Abstract
Titanium diboride ( TiB 2 ) was successfully hot‐pressed at 1500°C using titanium aluminum carbide ( Ti 3 AlC 2 ) as a sintering aid. The mechanisms for the improved sinterability of TiB 2 by the addition of Ti 3 AlC 2 involve, first, the Al coming from the decomposition of Ti 3 AlC 2 can eliminate the oxide layer on the surface of TiB 2 ; second, the TiC x (also from the decomposition of Ti 3 AlC 2 ) has a positive influence on the densification of TiB 2 due to its plasticity at high temperatures. TEM observations reveal that the interface between TiB 2 and TiC x is coherent and strong, free of amorphous layers and oxide phases. An optimized composition of TiB 2 ‐10 wt% Ti 3 AlC 2 was obtained with the unique combination of mechanical properties, including the elastic modulus of 567 GPa, the fracture toughness of 4.8 MPa·m 1/2 , the flexural strength of 711 MPa, and the hardness of 25 GPa.Keywords
This publication has 28 references indexed in Scilit:
- Correlation between phase evolution, mechanical properties and instrumented indentation response of TiB2-based ceramicsJournal of the European Ceramic Society, 2009
- Densification, Sintering Reactions, and Properties of Titanium Diboride With Titanium Disilicide as a Sintering AidJournal of the American Ceramic Society, 2007
- Processing and properties of monolithic TiB2based materialsInternational Materials Reviews, 2006
- Solid-state properties of hot-pressed TiB2 ceramicsInternational Journal of Refractory Metals and Hard Materials, 2005
- Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramicsJournal of the European Ceramic Society, 2002
- Material properties of titanium diborideJournal of Research of the National Institute of Standards and Technology, 2000
- Pressureless Sintering of Titanium Diboride with Nickel, Nickel Boride, and Iron AdditivesJournal of the American Ceramic Society, 1997
- Effect of Iron and Boron Carbide on the Densification and Mechanical Properties of Titanium Diboride CeramicsJournal of the American Ceramic Society, 1989
- Effect of Oxygen Contamination on Densification of TiB 2Journal of the American Ceramic Society, 1987
- Effect of Microstructure on the Properties of TiB 2 CeramicsJournal of the American Ceramic Society, 1983