Numerical Analysis of Radiative Heat Transfer and Direct Reduction of Three-Dimensional Multilayer Ellipsoidal Carbon-Containing Pellet Unit in the Rotary Hearth Furnace
Authors:
Open Access
Abstract
It is very important for a multilayer pellet bed to have a proper description of the radiant heat transfer and direct reduction process in the rotary hearth furnace. Ellipsoidal pellets may also be used in industrial production. The research on this ellipsoidal pellet bed will provide comprehensive data support for the production process. Besides, the view factor is one of the important factors affecting the heat transfer of the multilayer pellet bed. It is of great significance to study its value and distribution. In this study, the effects of the gas field and the bottom of the furnace on the direct reduction of multilayer ellipsoidal pellets were considered. The local environmental viewing angle coefficient in the model was obtained through the mechanism calculation method, which is more accurate than the calculation through the radiation exchange network. Furthermore, the porosity variation in the pellet during the direct reduction process was also considered. According to the calculation, it was found that the higher initial temperature at the furnace bottom is beneficial to increase the degree of metallization (DOM) and zinc removal rate (ZRR) for all pellets, and is more advantageous to the lower pellets in the material bed. Nevertheless, the reduction degree of the lower pellets is still smaller than that of the upper pellets. The results also show that increasing the offset has a greater effect on increasing the ambient view factor and each position reduction degree in the ellipsoidal pellets layer. Results can be applied for the optimization of pellets distribution in a rotary hearth furnace.
Keywords
This publication has 15 references indexed in Scilit:
- A Computational Study on the Reduction Behavior of Iron Ore/Carbon Composite Pellets in Both Single and Multi-layer Bed Rotary Hearth FurnaceMetallurgical and Materials Transactions B, 2020
- Process optimization of metallurgical dust recycling by direct reduction in rotary hearth furnacePowder Technology, 2018
- Modeling of Thermochemical Behavior in an Industrial-Scale Rotary Hearth Furnace for Metallurgical Dust RecyclingMetallurgical and Materials Transactions B, 2017
- Effect of CaO on the reduction behaviour of iron ore–coal composite pellets in multi-layer bed rotary hearth furnaceIronmaking & Steelmaking: Processes, Products and Applications, 2017
- Reduction Behaviour of Iron Ore–Coal Composite Pellets in Rotary Hearth Furnace (RHF): Effect of Pellet Shape, Size, and Bed Packing MaterialTransactions of the Indian Institute of Metals, 2016
- Effect of Amount of Carbon on the Reduction Efficiency of Iron Ore-Coal Composite Pellets in Multi-layer Bed Rotary Hearth Furnace (RHF)Metallurgical and Materials Transactions B, 2016
- CFD Modeling of Flow, Temperature, and Concentration Fields in a Pilot-Scale Rotary Hearth FurnaceMetallurgical and Materials Transactions B, 2014
- Study of reduction behaviour of prefabricated iron ore–graphite/coal composite pellets in rotary hearth furnaceIronmaking & Steelmaking: Processes, Products and Applications, 2013
- Rate-determining steps for reduction in magnetite-coal pelletsMinerals Engineering, 2002
- Studies on the reduction of hematite by carbonMetallurgical Transactions B, 1977