Effect of feedstock moisture content on biomass boiler operation

Authors:
  • NONaz Orang
    Naz Orang
  • HTHonghi Tran
    Honghi Tran
Publisher website
Google Scholar
Abstract
Burning feedstock with high and constantly varying moisture content is a challenge in the operationof the stoker-grate type biomass boilers in pulp and paper mills. A fundamental study was performed, using a thermogravimetric combustor controlled at different temperatures, to systematically investigate the effect of moisture content on the combustion behavior of several woody biomasses. The results show that combustion occurred through three stages: drying, devolatilization, and char burning. Increasing the moisture content of the sample above 30% significantly increased the drying time and the time to ignition of the sample. Moisture content, however, had only a small effect on the devolatilization rate and virtually no effect on the char burning rate. Furnace temperature had a great effect on combustion. Samples containing 40% moisture could still ignite and burn readily at 800°C, but they took a much longer time to ignite at 500°C and did not ignite at 400°C. These results imply that in biomass boiler operation, the high moisture content in feedstock delays combustion and causes the furnace temperature to decrease. The low temperature, in turn, suppresses combustion, further decreasing the furnace temperature and causing more delay in combustion. This downward spiral will eventually lead to a boiler blackout unless the biomass feed rate is significantly reduced or the auxiliary fuel (natural gas and fuel oil) flow rate cofired in the boiler is increased to keep the furnace temperature high.