Synthesis of ultrafine WC‐Co composite powders under hydrogen atmosphere with in situ carbon via a one‐step reduction‐carbonization process
Authors:
- 10 December 2016
- journal article
- Published by Wiley in International Journal of Applied Ceramic Technology
- Vol. 14 (2) , 220-227
Abstract
An inexpensive and facile direct method to synthesis ultrafine WC‐Co composite powders was proposed employing soluble starch as an in situ carbon source in a H2 atmosphere via a one‐step reduction‐carbonization process. Influences of processing factors, such as temperature, H2 flow rate, and reaction time have been investigated. The results revealed that the system of synthesis process was dynamic in nature where temperature, H2 flow rate, and reaction time had a suitable value to achieve the desired product phase. Mainly due to the gas reaction and homogeneous in situ carbon, the synthesizing temperature and reaction time were greatly lower than the conventional method. Lowering the reaction temperature and increasing the reaction rate would lead to finer WC‐Co composite powders. Ultrafine WC‐Co composite powders with almost no unwanted phases were obtained under the H2 flow rate of 0.75 m3/h at 950°C for 0.5 hour and the average particle size was 155 nm with good dispersion. Furthermore, the mechanism for the phase transformation was discussed in this study as well.Keywords
Funding Information
- National Natural Science Foundation of China (51404302)
This publication has 21 references indexed in Scilit:
- The equilibrium morphology of WC particles – A combined ab initio and experimental studyActa Materialia, 2011
- Comparative kinetic and structural analyses of nanocrystalline WC powder synthesis from pre-reduced W under pure and diluted CH4 atmospheresInternational Journal of Refractory Metals and Hard Materials, 2011
- Direct solid-state synthesis of tungsten carbide nanoparticles from mechanically activated tungsten oxide and graphiteInternational Journal of Refractory Metals and Hard Materials, 2010
- Synthesis, sintering, and mechanical properties of nanocrystalline cemented tungsten carbide – A reviewInternational Journal of Refractory Metals and Hard Materials, 2009
- Growth process of the ridge–trough faces of a twinned crystalActa Crystallographica Section A Foundations of Crystallography, 2005
- Synthesis of tungsten carbide through gas–solid reaction at low temperaturesMaterials Science and Engineering: A, 2001
- Synthesis of Tungsten Carbides by Temperature-Programmed Reaction with CH4–H2 Mixtures. Influence of the CH4 and Hydrogen Content in the Carburizing MixtureJournal of Solid State Chemistry, 2000
- Synthesis of nanophase WC powder by a displacement reaction processNanostructured Materials, 1997
- Chemical processing and applications for nanostructured materialsNanostructured Materials, 1995
- A history of fine grained hardmetalInternational Journal of Refractory Metals and Hard Materials, 1995