Power-Loss Breakdown of a 750-V 100-kW 20-kHz Bidirectional Isolated DC–DC Converter Using SiC-MOSFET/SBD Dual Modules
- 18 June 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 51 (1) , 420-428
Abstract
This paper describes the design, construction, and testing of a 750-V 100-kW 20-kHz bidirectional isolated dual-active-bridge dc-dc converter using four 1.2-kV 400-A SiC-MOSFET/SBD dual modules. The maximum conversion efficiency from the dc-input to the dc-output terminals is accurately measured to be as high as 98.7% at 42-kW operation. The overall power loss at the rated-power (100 kW) operation, excluding the gate-drive and control circuit losses, is divided into the conduction and switching losses produced by the SiC modules, the iron and copper losses due to magnetic devices, and the other unknown loss. The power-loss breakdown concludes that the sum of the conduction and switching losses is about 60% of the overall power loss and that the conduction loss is nearly equal to the switching loss at the 100-kW and 20-kHz operation.Keywords
Funding Information
- Cabinet Office, Government of Japan
- Japan Society for the Promotion of Science (JSPS)
This publication has 16 references indexed in Scilit:
- Experimental discussions on operating frequencies of a bidirectional isolated DC-DC converter for a battery energy storage system2013
- High-Power Bidirectional DC–DC Converter for Aerospace ApplicationsIEEE Transactions on Power Electronics, 2012
- Design and Performance of a Bidirectional Isolated DC–DC Converter for a Battery Energy Storage SystemIEEE Transactions on Power Electronics, 2012
- Evaluation of a 1200-V, 800-A All-SiC Dual ModuleIEEE Transactions on Power Electronics, 2011
- Improvement of light load efficiency of Dual Active Bridge DC-DC converter by using dual leakage transformer and variable frequency2010
- Accurate Power Loss Model Derivation of a High-Current Dual Active Bridge Converter for an Automotive ApplicationIEEE Transactions on Industrial Electronics, 2009
- Hybrid Modulation for Dual-Active-Bridge Bidirectional Converter With Extended Power Range for Ultracapacitor ApplicationIEEE Transactions on Industry Applications, 2009
- Voltage Balancing of a 320-V, 12-F Electric Double-Layer Capacitor Bank Combined With a 10-kW Bidirectional Isolated DC--DC ConverterIEEE Transactions on Power Electronics, 2008
- A Bidirectional Isolated DC–DC Converter as a Core Circuit of the Next-Generation Medium-Voltage Power Conversion SystemIEEE Transactions on Power Electronics, 2007
- A comparison of high-power DC-DC soft-switched converter topologiesIEEE Transactions on Industry Applications, 1996