A two-step procedure for damage detection in beam structures with incomplete mode shapes
Open Access
- 9 August 2024
- journal article
- research article
- Published by Springer Nature in Journal of Civil Structural Health Monitoring
- Vol. 15 (2) , 287-306
Abstract
In this work, we present a two-step procedure for damage identification in beam structures exploiting modal curvature changes. The reconstruction of modal curvatures requires the knowledge of several mode shape components along the analyzed beam. This requirement is practically unachievable when mode shapes are identified via vibration-based monitoring using a limited number of accelerometers. To overcome this limitation, in the first step of the proposed procedure, we perform a mode shape expansion employing a reduced subset of measured modal components. The remaining measured components are used as control parameters to formulate a first hypothesis on damage location and extent. For this purpose, the expansion procedure is performed considering a number of possible damage scenarios, consisting of a location and a severity (loss of stiffness) of the damage. Using the Total modal assurance criterion (TMAC), we select the expanded modes with the highest degree of correspondence with the measured control components. These expanded modes are thus associated with a first guess of the damage location and severity. In the next step, this initial damage identification is verified through the computation of a modal curvature-based damage index. If the curvature-based damage identification confirms the previous identification, the damage location and extent are determined. The procedure can be easily extended to identify multiple simultaneously damaged elements. The approach is numerically validated using a benchmark beam modeled via finite elements, investigating the influence of different parameters such as noise, position of the control components and beam discretization on the identification success rate. Finally, the procedure is tested on two experimental specimens: a steel beam, with three different damage configurations and a concrete beam progressively damaged with multiple damage locations.Keywords
Funding Information
- Alma Mater Studiorum - Università di Bologna
This publication has 44 references indexed in Scilit:
- A Kriging Approach to Model Updating for Damage Detection2022
- Seismic Structural Health Monitoring2019
- Vibration‐Based Damage Identification Methods2018
- EFFECT OF MODAL CURVATURES ON DAMAGE DETECTION USING MODEL UPDATINGMechanical Systems and Signal Processing, 2001
- AN ITERATIVE METHOD FOR DYNAMIC CONDENSATION OF STRUCTURAL MATRICESMechanical Systems and Signal Processing, 2000
- DAMAGE DETECTION USING THE FREQUENCY-RESPONSE-FUNCTION CURVATURE METHODJournal of Sound and Vibration, 1999
- DAMAGE DETECTION IN BRIDGES USING MODAL CURVATURES: APPLICATION TO A REAL DAMAGE SCENARIOJournal of Sound and Vibration, 1999
- DYNAMIC BENDING AND TORSION STIFFNESS DERIVATION FROM MODAL CURVATURES AND TORSION RATESJournal of Sound and Vibration, 1999
- Model reduction using dynamic and iterated IRS techniquesJournal of Sound and Vibration, 1995
- Damage Detection in Structures Using Changes in FlexibilityJournal of Sound and Vibration, 1994