Experimental Investigation on Crashworthiness Behaviors of 3D ‐Printed Cellular Composite Sandwich Structures
Authors:
Open Access
- 20 May 2025
- journal article
- Published by Wiley in Polymer Composites
- Vol. 46 (15) , 14433-14446
Abstract
This study presents an experimental investigation into the quasi‐static crashworthiness of carbon fiber‐reinforced polymer (CFRP) sandwich structures incorporating 3D‐printed cores with four distinct geometries: honeycomb, re‐entrant, double‐arrowhead, and missing rib‐cut. The core structures were fabricated by fused deposition modeling (FDM) using polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS) and subsequently bonded to CFRP face sheets to assemble the sandwich panels. The specimens were tested under quasi‐static axial compression to evaluate key crash indicators, including energy absorption (EA), specific energy absorption (SEA), peak crush force (PCF), mean crush force (MCF), and crush force efficiency (CFE). The highest EA was obtained from missing rib‐cut core specimens, reaching 85.25 (PLA) and 52.85 J (ABS), with corresponding SEA values of 1.74 and 1.27 J/g, respectively. The lowest SEA values were recorded in re‐entrant core specimens with 0.68 (PLA) and 0.51 J/g (ABS). Honeycomb cores exhibited the highest CFE values of 0.670 (ABS) and 0.519 (PLA), indicating more efficient force distribution. Force‐displacement responses showed that honeycomb and double‐arrowhead cores maintained consistent peak force patterns, while re‐entrant cores displayed a nearly constant force in the plateau region after an initial peak. Missing rib‐cut cores exhibited irregular peak forces until densification. Across all geometries, PLA cores showed higher SEA and EA values than ABS. The results indicate that both core geometry and material selection significantly affect the crash performance and energy absorption characteristics of sandwich structures under quasi‐static loading conditions.Keywords
Funding Information
- Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
This publication has 65 references indexed in Scilit:
- A study of crashworthiness performance in thin‐walled multi‐cell tubes 3D‐printed from different polymersJournal of Applied Polymer Science, 2024
- Biodegradable 3D printed polylactic acid structures for different engineering applications: effect of infill pattern and densityJournal of Polymer Research, 2023
- Advanced structural and multi‐functional sandwich composites with prismatic and foam cores: A reviewPolymer Composites, 2023
- Exploring the effect of nanoclay addition on energy absorption capability of laterally loaded glass/epoxy composite tubesPolymer Composites, 2023
- Evaluation of the mechanical properties of fully integrated 3D printed polymeric sandwich structures with auxetic cores: experimental and numerical assessmentThe International Journal of Advanced Manufacturing Technology, 2022
- State of the art review on mechanical properties of sandwich composite structuresPolymer Composites, 2022
- Study on compression characteristics of honeycomb sandwich structure with multistage carbon fiber reinforced compositesPolymer Composites, 2022
- Investigation of Tensile Properties of Glass Fiber/Epoxy Nanocomposites Laminates Enhanced with Graphene NanoparticlesFibers and Polymers, 2021
- Crashworthiness analysis of a cylindrical auxetic structure under axial impact loadingScience China Technological Sciences, 2019
- Application of homogenization FEM analysis to regular and re-entrant honeycomb structuresJournal of Materials Science, 1996