The Impact Of Ultrasound-Assisted Mixing Method For Varnish And Components On The Varnish Layer’s Surface Hardness And Surface Scratch Resistance
- 28 August 2024
- journal article
- Published by Lukasiewicz Research Network - Poznan Technology Institute in Drewno. Prace Naukowe, Doniesienia, Komunikaty = Wood. Research Papers, Reports, Announcements
- Vol. 67 (213)
Abstract
The objective of this study was to determine effects of mechanical and ultrasound-assisted stirring methods for varnish + components mixing on the varnish layer’s surface hardness and surface scratch resistance. The study focused on polyurethane, acrylic, and polyester varnish systems, which were applied to three distinct wood types: Scots pine (Pinus sylvestris L.), Turkish beech (Fagus orientalis Lipsky), and African mahogany (Khaya ivorensis A. Chev.). The mixing processes included mechanical stirring for 3 and 5 minutes, as well as ultrasound-assisted stirring with varying power levels (80 watts and 120 watts) for 3 and 5 minutes. The results indicated that the highest surface hardness was achieved using the mechanical stirring method for Turkish beech with polyester varnish at 3 minutes of stirring (175.10), while the lowest surface hardness was observed for African mahogany with acrylic varnish and 120 watts ultrasound-assisted stirring for 5 minutes (66.80). The highest surface scratch resistance was observed in Scots pine treated with polyester varnish using mechanical stirring for 5 minutes (0.760 N), and in Turkish beech treated with acrylic varnish using 80 watts ultrasound-assisted stirring for 3 minutes (0.760 N). Overall, the findings suggested that the ultrasound-assisted mixing method generally fell short in terms of enhancing the varnish properties compared to the mechanical mixing technique.Keywords
This publication has 13 references indexed in Scilit:
- Effects of artificial weathering on the color, gloss, adhesion, and pendulum hardness of UV system parquet varnish applied to doussie (Afzelia africana) woodBioResources, 2020
- The impact of ultrasonic power and time for the removal of Total Petroleum Hydrocarbon from low permeability contaminated soilsIOP Conference Series: Earth and Environmental Science, 2019
- Effect of ultrasound on bubble-particle interaction in quartz-amine flotation systemUltrasonics Sonochemistry, 2019
- Novel SO3H-functionalized dicationic ionic liquids – A comparative study for esterification reaction by ultrasound cavitation and mechanical stirring for biodiesel productionSeparation and Purification Technology, 2018
- A comparative study of effect of mechanical and ultrasound agitation on the properties of pulse electrodeposited Ni-W/MWCNTs composite coatingsJournal of Alloys and Compounds, 2018
- Studying dispersion quality of nanoparticles into a bio-based coatingProgress in Organic Coatings, 2015
- Mechanical properties of UV-waterborne varnishes reinforced by cellulose nanocrystalsJournal of Coatings Technology and Research, 2014
- Mechanical behaviour of Québec wood species heat-treated using ThermoWood processEuropean Journal of Wood and Wood Products, 2007
- Application of Ultrasound2005
- Effect of ultrasound on oil removal from soilsUltrasonics, 2003