Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil
- 1 September 2011
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 225 (9) , 1505-1511
Abstract
Minimum quantity lubrication (MQL) machining involves the application of small quantity of lubricant to the tool–workpiece interface. This paper describes the results of an investigation on the effects of using different MQL lubricants (synthetic ester and palm oil) on the drilling of Ti-6Al-4V. Dry cutting was also performed for comparison purposes. It was found that drilling under dry conditions resulted in the shortest tool life due to severe chipping. MQL is beneficial to the measured responses such as tool life, thrust force, torque, and temperature. The outstanding performance of palm oil in reducing the value of those responses was attributed to its ability to form a thin film which promoted boundary lubrication during the machining process. The presented results indicated the substantial benefit of using palm oil in terms of microhardness, surface roughness, and subsurface deformation. This work shows that palm oil can be used as a viable alternative to a synthetic ester as a MQL lubricant.Keywords
This publication has 9 references indexed in Scilit:
- A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloysTribology International, 2011
- Effect of MQL Liquids on Surface Integrity when High Speed Drilling Titanium AlloyKey Engineering Materials, 2010
- Performance of coated- and uncoated-carbide tools when drilling titanium alloy—Ti–6Al4VJournal of Materials Processing Technology, 2007
- Advancing Cutting TechnologyCIRP Annals, 2003
- Using a minimum quantity of lubricant (MQL) and a diamond coated tool in the drilling of aluminum–silicon alloysJournal of Materials Processing Technology, 2002
- Minimal lubrication machining of aluminium alloysJournal of Materials Processing Technology, 2002
- Performance of oxide PVD-coatings in dry cutting operationsSurface and Coatings Technology, 2001
- Dry machining — commercial viability through filtered arc vapour deposited coatingsSurface and Coatings Technology, 2000
- Lubricant basestocks from vegetable oilsIndustrial Crops and Products, 2000