The impact of drop-shaped pin-fins on the thermal and hydraulic characteristics of a finned tube
Author:
- 1 July 2024
- journal article
- research article
- Published by AIP Publishing in Physics of Fluids
- Vol. 36 (7)
Abstract
In this study, circular and drop-shaped pin-fins were employed to investigate the influence of pin-fins on the thermal behavior and flow characteristics of finned tubes using a combination of experimental and numerical methods. The configuration of in-line pin-fins was analyzed and compared with that of a smooth tube. The analysis covered Reynolds numbers spanning from Re = 7.03 × 103 to 35.17 × 103. Thermal and hydraulic contours were depicted. Two methodologies were utilized to assess the overall performance. The outcomes demonstrated that the average Nusselt number for the finned tubes equipped with drop and circular pin-fins rose by approximately 50.03%–93.1% and 59.59%–77.08%, respectively, in comparison to the smooth circular tube. Moreover, the drop-shaped pin-fins on the tube displayed a reduced friction factor, leading to a reduction of 1.36%–7.95% in comparison to the circular counterpart. Furthermore, both drop and circular pin-fins on the tubes exhibited approximately 2.93%–54.89% and 7.33%–37.1% higher efficiency, respectively, compared to the smooth tube. Generalized correlations were developed to compute the Nusselt number, friction factor, and effectiveness in relation to the Reynolds number, with the aim of providing guidance for future research and design efforts in heat exchangers incorporating pin-fin tubes. The utilization of tubes featuring drop-shaped pin-fins plays a significant role in energy conservation.Keywords
This publication has 39 references indexed in Scilit:
- Thermo-hydraulic investigation of open micro prism pin fin heat sink having varying prism sidesAlexandria Engineering Journal, 2023
- Heat transfer and fluid flow analysis of microchannel heat sinks with periodic vertical porous ribsApplied Thermal Engineering, 2022
- The role of renewable energy in the global energy transformationEnergy Strategy Reviews, 2019
- Numerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflowApplied Thermal Engineering, 2017
- Effect of attack and cone angels on air flow characteristics for staggered wing shaped tubes bundleHeat and Mass Transfer, 2014
- Experimental study of thermal–hydraulic performance of cam-shaped tube bundle with staggered arrangementEnergy Conversion and Management, 2014
- Heat transfer characteristics of staggered wing-shaped tubes bundle at different angles of attackHeat and Mass Transfer, 2014
- Numerical study of heat transfer performance of single-phase heat sinks with micro pin-fin structuresApplied Thermal Engineering, 2013
- Experimental study on the heat transfer and pressure drop of a cross-flow heat exchanger with different pin–fin arraysHeat and Mass Transfer, 2011
- Application of rough surfaces to heat exchanger designInternational Journal of Heat and Mass Transfer, 1972