Marginal and internal fit of zirconia copings obtained using different digital scanning methods
Open Access
- 1 January 2016
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 30 (1) , e113
Abstract
The objective of this study was to evaluate the marginal and internal fit of zirconia copings obtained with different digital scanning methods. A human mandibular first molar was set in a typodont with its adjacent and antagonist teeth and prepared for an all-ceramic crown. Digital impressions were made using an intraoral scanner (3Shape). Polyvinyl siloxane impressions and Type IV gypsum models were also obtained and scanned with a benchtop laboratory scanner (3Shape D700). Ten zirconia copings were fabricated for each group using CAD-CAM technology. The marginal and internal fit of the zirconia copings was assessed by the silicone replica technique. Four sections of each replica were obtained, and each section was evaluated at four points: marginal gap (MG), axial wall (AW), axio-occlusal edge (AO) and centro-occlusal wall (CO), using an image analyzing software. The data were submitted to one-way ANOVA and Tukey’s test (α = 0.05). They showed statistically significant differences for MG, AO and CO. Regarding MG, intraoral scanning showed lower gap values, whereas gypsum model scanning showed higher gap values. Regarding AO and CO, intraoral digital scanning showed lower gap values. Polyvinyl siloxane impression scanning and gypsum model scanning showed higher gap values and were statistically similar. It can be concluded that intraoral digital scanning provided a lower mean gap value, in comparison with conventional impressions and gypsum casts scanned with a standard benchtop laboratory scanner.Keywords
This publication has 22 references indexed in Scilit:
- Accuracy of single-tooth restorations based on intraoral digital and conventional impressions in patientsClinical Oral Investigations, 2015
- Evaluation of the adaptation of zirconia-based fixed partial dentures using micro-CT technologyBrazilian Oral Research, 2013
- Marginal and internal fit of four-unit zirconia fixed dental prostheses based on digital and conventional impression techniquesClinical Oral Investigations, 2013
- Influence of marginal fit and cement types on microleakage of all-ceramic crown systemsBrazilian Oral Research, 2011
- Impression Materials in Fixed Prosthodontics: Influence of Choice on Clinical ProcedureJournal of Prosthodontics, 2011
- Evaluation of Different Methods of Optical Impression Making on the Marginal Gap of Onlays Created with CEREC 3DOperative Dentistry, 2010
- Impressions Are ChangingThe Journal of the American Dental Association, 2009
- The Clinical Success Of All-Ceramic RestorationsThe Journal of the American Dental Association, 2008
- Crowns and other extra-coronal restorations: Impression materials and techniqueBritish Dental Journal, 2002
- Effect of Camera Angulation on Adaptation of CAD/CAM RestorationsJournal of Esthetic and Restorative Dentistry, 2000