Analysis and Design of a Reconfigurable Rectifier Circuit for Wireless Power Transfer
- 24 October 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (9) , 7089-7098
Abstract
An efficient and reconfigurable rectifier circuit, with the capability of automatically switching from low-power to high-power operation mode, is presented. The new topology allows the rectifier to convert RF power to DC power efficiently over an extended input power range. The circuit consists of diodes as rectifying elements and of n-channel Field Effect Transistor in depletion mode acting as the automated switch. Without using an external DC source, the circuit directly uses the rectified output DC voltage to bias the transistor, allowing high conversion efficiency over a wide input power range. This results in a compact and self-contained circuit. Two prototypes optimized for near-field and far-field wireless power transfer systems are fabricated and the measured results show that the performance exceeds that of the conventional rectifier circuit, which can only stay efficient over a limited range of input power. The proposed design can maintain more than 50% of conversion efficiency over more than 25-dB range of input power, with peak efficiency of 88% and 80% for near-field and far-field rectifiers respectively. A system-level validation also confirms the improvement of the proposed rectifier design.Keywords
Funding Information
- Singapore National Research Foundation Industry-IHL Partnership (NRF2015-IIP003-008)
- National University of Singapore Hybrid-Integrated Flexible (Stretchable) Electronics System Program
This publication has 31 references indexed in Scilit:
- Multiband and Broadband Wireless Power Transfer Systems Using the Conformal Strongly Coupled Magnetic Resonance MethodIEEE Transactions on Industrial Electronics, 2016
- Sensitive and Efficient RF Harvesting Supply for Batteryless Backscatter Sensor NetworksIEEE Transactions on Microwave Theory and Techniques, 2016
- Enhanced Dual-Band Ambient RF Energy Harvesting With Ultra-Wide Power RangeIEEE Microwave and Wireless Components Letters, 2015
- Wireless Power and Data Transfer via a Common Inductive Link Using Frequency Division MultiplexingIEEE Transactions on Industrial Electronics, 2015
- Theoretical Energy-Conversion Efficiency for Energy-Harvesting Circuits Under Power-Optimized Waveform ExcitationIEEE Transactions on Microwave Theory and Techniques, 2015
- Boosting the Efficiency: Unconventional Waveform Design for Efficient Wireless Power TransferIEEE Microwave Magazine, 2015
- Towards Low-Power High-Efficiency RF and Microwave Energy HarvestingIEEE Transactions on Microwave Theory and Techniques, 2014
- Analysis and Design of a Wireless Power Transfer System With an Intermediate Coil for High EfficiencyIEEE Transactions on Industrial Electronics, 2014
- Design of rectifier with extended operating input power rangeElectronics Letters, 2013
- Theoretical and experimental development of 10 and 35 GHz rectennasIEEE Transactions on Microwave Theory and Techniques, 1992