Design and Analysis of a Novel Piezoceramic Stack-based Smart Aggregate
Open Access
Abstract
A novel piezoceramic stack-based smart aggregate (PiSSA) with piezoceramic wafers in series or parallel connection is developed to increase the efficiency and output performance over the conventional smart aggregate with only one piezoelectric patch. Due to the improvement, PiSSA is suitable for situations where the stress waves easily attenuate. In PiSSA, the piezoelectric wafers are electrically connected in series or parallel, and three types of piezoelectric wafers with different electrode patterns are designed for easy connection. Based on the theory of piezo-elasticity, a simplified one-dimensional model is derived to study the electromechanical, transmitting and sensing performance of PiSSAs with the wafers in series and parallel connection, and the model was verified by experiments. The theoretical results reveal that the first resonance frequency of PiSSAs in series and parallel decreases as the number or thickness of the PZT wafers increases, and the first electromechanical coupling factor increases firstly and then decrease gradually as the number or thickness increases. The results also show that both the first resonance frequency and the first electromechanical coupling factor of PiSSA in series and parallel change no more than 0.87% as the Young’s modulus of the epoxy increases from 0.5 to 1.5 times 3.2 GPa, which is helpful for the fabrication of PiSSAs. In addition, the displacement output of PiSSAs in parallel is about 2.18–22.49 times that in series at 1–50 kHz, while the voltage output of PiSSAs in parallel is much less than that in parallel, which indicates that PiSSA in parallel is much more suitable for working as an actuator to excite stress waves and PiSSA in series is suitable for working as a sensor to detect the waves. All the results demonstrate that the connecting type, number and thickness of the PZT wafers should be carefully selected to increase the efficiency and output of PiSSA actuators and sensors. This study contributes to providing a method to investigate the characteristics and optimize the structural parameters of the proposed PiSSAs.Keywords
Funding Information
- National Natural Science Foundation of China (51808417, 51475339)
- Hubei Key Laboratory of Mechanical Transmission and Manufacturing Engineering of China (2018A09)
This publication has 82 references indexed in Scilit:
- A Three-Dimensional Model of the Effective Electromechanical Impedance for an Embedded PZT TransducerMathematical Problems in Engineering, 2013
- Analytical solution of piezoelectric composite stack transducersJournal of Intelligent Material Systems and Structures, 2013
- Radially sandwiched cylindrical piezoelectric transducerSmart Materials and Structures, 2012
- A PZT-based smart aggregate for compressive seismic stress monitoringSmart Materials and Structures, 2012
- Multi-functional smart aggregate-based structural health monitoring of circular reinforced concrete columns subjected to seismic excitationsSmart Materials and Structures, 2010
- Smart aggregates: multi-functional sensors for concrete structures—a tutorial and a reviewSmart Materials and Structures, 2008
- The radial composite piezoelectric ceramic transducerSensors and Actuators A: Physical, 2008
- Concrete structural health monitoring using embedded piezoceramic transducersSmart Materials and Structures, 2007
- An overheight vehicle–bridge collision monitoring system using piezoelectric transducersSmart Materials and Structures, 2007
- Health monitoring and rehabilitation of a concrete structure using intelligent materialsSmart Materials and Structures, 2006