Plasma sprayed Cr3C2–Ni–Cr coating for oxidation protection of 2·25Cr–1Mo steel
Authors:
- 1 April 2015
- journal article
- Published by SAGE Publications in Surface Engineering
- Vol. 31 (5) , 342-348
Abstract
This paper investigated the influence of Cr3C2–Ni–Cr coating on high temperature oxidation behaviour of 2·25Cr–1Mo steel. The coating of Cr3C2–NiCr was made by plasma spray coating method. The isothermal corrosion test was carried in air oxidation environment at 973 K for 72 h and the weight change of the specimen during corrosion was measured at different interval. The corrosion rate and reaction kinetics were studied and the post corroded scales were characterised in SEM, EDS and XRD. The results clearly indicated that Cr3C2–NiCr coated specimen significantly improved the oxidation resistance. The improvement of oxidation resistance in presence of coating could be attributed to the formation of protective Cr2O3 layer and changed mechanism of scale growth from outer cation migration to inner anion migration. The detail mechanism of the oxidation behaviour of Cr3C2–NiCr coated and uncoated specimen was discussed in this paper.Keywords
This publication has 21 references indexed in Scilit:
- High-Temperature Behavior of a High-Velocity Oxy-Fuel Sprayed Cr3C2-NiCr CoatingMetallurgical and Materials Transactions A, 2012
- Structure and wear behaviour of HVOF sprayed Cr3C2–NiCr and WC–Co coatingsMaterials & Design (1980-2015), 2003
- Role of heat treatments in the improvement of the sliding wear properties of Cr3C2–NiCr coatingsSurface and Coatings Technology, 2002
- Part II: tribological performance of Cr3C2-25% NiCr reactive plasma sprayed coatings deposited at different pressuresSurface and Coatings Technology, 2001
- A comparative study of high-temperature erosion wear of plasma-sprayed NiCrBSiFe and WC–NiCrBSiFe coatings under simulated coal-fired boiler conditionsTribology International, 2001
- Effects of Cold Work, Sensitization Treatment, and the Combination on Corrosion Behavior of Stainless Steels in Nitric AcidCorrosion, 1998
- Elaboration, microstructure and reactivity of Cr3C2 powders of different morphologyMaterials Research Bulletin, 1995
- Coatings resistant to erosive/corrosive and severe environmentsSurface and Coatings Technology, 1993
- Oxidation and Hot Corrosion of Some Advanced Superalloys at 1300 to 2000°F (704 to 1093°C)Corrosion, 1989
- The effect of alloying additions on MCrAlY systems—An experimental studyThin Solid Films, 1982