Evolution with Temperature of Crystalline and Amorphous Phases in Porcelain Stoneware
- 5 January 2009
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 92 (1) , 229-234
Abstract
Porcelain stoneware tile is a ceramic building material characterized by high technological properties, especially regarding water absorption, chemical and frost resistance, bending strength and abrasion resistance. Because mineralogy is one of the main factors affecting the mechanical properties of porcelain stoneware, a complete determination and quantification of the mineral and amorphous phases is of special importance in the study of porcelain stoneware tiles. In the present work, a reference industrial composition (50% kaolinitic clay, 40% feldspar, and 10% quartz) of porcelain stoneware tiles fired at different temperatures (400°–1400°C) was characterized by X‐ray powder diffraction combined with quantitative full‐phase analysis using the Rietveld method, including amorphous content. The green composition contained albite, microcline, and muscovite as fluxing agents, which start to decompose at low temperatures (400°–800°C range) and are completely dissolved above 1200°C. The mullite phase is formed from 1100° to 1230°C and at the latter temperature, quartz particles start to dissolve. Studies of mineralogical evolution have revealed that the high heating rate (45°–50°C/min) required in ceramic tile manufacture leads to significant differences in comparisons with whiteware ceramics fired at a lower heating rate (10°C/min). Thus, the formation of mullite in porcelain stoneware occurs at higher temperatures (1100°C) whereas the transformation of β‐quartz to β‐cristobalite does not take place. The experimental results of this study show that qualitative mineralogical analysis, based on the intensity of a particular diffraction peak for each crystalline phase, is a suitable methodology to obtain preliminary knowledge of mineralogical changes with temperature.Keywords
This publication has 20 references indexed in Scilit:
- Effect of firing temperature on sintering of porcelain stoneware tilesCeramics International, 2008
- Microstructural Evolution in Clay‐Based Ceramics II: Ternary and Quaternary Mixtures of Clay, Flux, and Quartz FillerJournal of the American Ceramic Society, 2008
- Microstructural Evolution on Firing Soda–Lime–Silica Glass Fluxed WhitewaresJournal of the American Ceramic Society, 2005
- Microstructural Variation in Porcelain Stoneware as a Function of Flux SystemJournal of the American Ceramic Society, 2004
- Rietveld Quantitative Analysis of Buen Retiro PorcelainsJournal of the American Ceramic Society, 2004
- Full Phase Analysis of Portland Clinker by Penetrating Synchrotron Powder DiffractionAnalytical Chemistry, 2000
- Porcelain—Raw Materials, Processing, Phase Evolution, and Mechanical BehaviorJournal of the American Ceramic Society, 1998
- Vitrification of Whiteware Bodies in Alumina-Feldspar-Kaolin SystemJournal of the Ceramic Society of Japan, 1992
- Effect of Grain Size of Quartz on Mechanical Strength of Porcelain BodyJournal of the Ceramic Society of Japan, 1991
- A profile refinement method for nuclear and magnetic structuresJournal of Applied Crystallography, 1969