Elastohydrodynamic lubrication of coated finite line contacts
Open Access
- 12 April 2017
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 232 (9) , 1077-1092
Abstract
In this work, a finite element-based model is presented that simulates elastohydrodynamic lubrication in coated finite line contacts. Using this model, the film thickness and pressure distributions, between a straight roller with rounded edges on a plate, were analyzed. The model was successfully validated against representative results reported in literature. Parameter studies were conducted to study the influence of varying operating conditions, axial surface profile parameters and coating mechanical properties on the overall elastohydrodynamic lubrication behavior of the contact. It was found that in contrast with typical elastohydrodynamic lubrication behavior, the maximum pressure and minimum film thickness, which are located at the rear of the contact, are largely influenced by variations in load. Results also reveal that axial surface profile parameters and coating mechanical properties may act as amplifiers to the effect of load on pressure and film thickness distribution and can thus, if smartly chosen, significantly enhance lubrication performance.Keywords
This publication has 18 references indexed in Scilit:
- Fully coupled EHL model for simulation of finite length line cam-roller follower contactsTribology International, 2016
- A Full-System Approach of the Elastohydrodynamic Line/Point Contact ProblemJournal of Tribology, 2008
- Micro-elastohydrodynamic lubrication of coated cylinders using coupled differential deflection methodProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2006
- Aligned and misaligned contacts of rollers to races in elastohydrodynamic finite line conjunctionsProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2002
- Elastohydrodynamic lubrication of a finite line contactWear, 1998
- EHL of Coated Surfaces: Part I—Newtonian ResultsJournal of Tribology, 1994
- A numerical analysis of the elastohydrodynamic lubrication of elliptical contactsWear, 1990
- Elastohydrodynamic Lubrication of a Line ContactProceedings of the Institution of Mechanical Engineers, 1974
- Hydrodynamic Lubrication of Soft SolidsJournal of Mechanical Engineering Science, 1970
- The Mapping of Elastohydrodynamic ContactsA S L E Transactions, 1967