The Effect of Porosity Ratio on Bonding Strength in Adhesively Bonded Composite Aluminium Foams
- 31 December 2025
- journal article
- Published by Bitlis Eren Universitesi Fen Bilimleri Dergisi in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
- Vol. 14 (4) , 2639-2663
Abstract
Metal foams are lightweight materials with unique physical and mechanical properties, including high specific strength, stiffness, and energy absorption capacity. These materials are becoming increasingly popular because they can be used in a variety of applications, including crash boxes in the automotive industry, chassis pillars, and structural elements in the aerospace industry, artificial bone and implants in the biomedical industry, and structural elements in the ship and construction industries. Metal foams could be made up of aluminium, titanium, nickel, and several other materials. Ultimately, what kind of material the metal foam should be made up of depends on the field of application. Nowadays aluminium composite foam materials are being used more frequently. This is due to its low density. It is also resistant to corrosion and a low melting point. In this study, the effect of surface porosity ratios of aluminium composite foam material on adhesive bond strength has been examined. The surface porosity ratios of aluminium composite foam materials were examined, and the specimens were divided into five groups based on their surface porosity ratios: those less than 40%, those between 40% and 50%, those between 50% and 60%, those between 60% and 70%, and those greater than 70%. Aluminium composite foam materials with various surface porosity ratios were assembled using the single lap joint method with aluminium blocks by using epoxy adhesive. The bonding strength was then evaluated under a compressive shear load using a modified procedure based on ASTM D905-08. The results indicate that aluminium composite foams with a surface porosity ratio between 40% and 50% tend to exhibit relatively higher adhesive strength compared to other porosity ranges. Aluminium composite foams with a surface porosity ratio exceeding 60% tend to exhibit lower adhesion strength compared to those with lower porosity ratios.Keywords
Funding Information
- TÜBİTAK (119M001)
This publication has 36 references indexed in Scilit:
- A Novel Sandwich Aluminum Foam Composite Reinforced with Steel Prepared by Arc SprayingAdvanced Engineering Materials, 2025
- Processing of aluminium/fly ash composite foams for sustainable green productsJournal of Porous Materials, 2022
- Experimental Study of Heat Transfer Enhancement in Double-Pipe Heat Exchanger Integrated with Metal Foam FinsArabian Journal for Science and Engineering, 2020
- Joining of carbon fibre reinforced polymer to Al-Si alloy for space applicationsInternational Journal of Adhesion and Adhesives, 2018
- Manufacturing, characterization and applications of lightweight metallic foams for structural applications: ReviewMaterials Today: Proceedings, 2018
- On the influence of porosity and pore size on AlSi17 alloy foam using artificial neural networkCiência & Tecnologia dos Materiais, 2017
- Aluminium foam–polymer composites: processing and characteristicsJournal of Materials Science, 2009
- Plasma treatment using nitrogen gas to improve bonding strength of adhesively bonded aluminum foam/aluminum compositeJournal of Alloys and Compounds, 2008
- Handbook of Cellular Metals2002
- Processing of Metal Foams—Challenges and OpportunitiesAdvanced Engineering Materials, 2000