Influence of Deformable Mandrel Based Composite Part Forming Process on Part Forming Accuracy
Authors:
Open Access
- 23 October 2021
- conference paper
- Published by Association for Computing Machinery (ACM)
- p. 2581-2585
Abstract
In the manufacturing process of carbon fiber reinforced polymer (CFRP) composite part, the mandrel is an important component for shaping the inner cavity of the part. Some composite parts with complex cavities are difficult to demold when the traditional rigid mandrel is used. To solve this problem, a deformable mandrel that can be softened by heating is developed to resolve the complications regarding difficult demolding. In this paper, according to the designed shape of a CFRP spar with a C-shaped variable cross-section and multi-twist structure, a deformable mandrel based on carbon fiber reinforced thermoplastic polymer (CFRTP) composite is developed and produced. Based on the heating-to-soften characteristic of the deformable mandrel, the manufacturing of the spar is completed. Experiments with respect to the influence of the air pressure inside the mandrel during prepreg curing on the forming accuracy of the part are carried out. The error distribution results of the comparison between the digitized model of practical spar part and the designed model verified the feasibility of air pressure balance inside and outside the mandrel in the process of vacuum bag-assisted prepreg curing.Keywords
This publication has 9 references indexed in Scilit:
- Analysis of fracture toughness in mode II and fractographic study of composites based on Elium® 150 thermoplastic matrixComposites Part B: Engineering, 2019
- Triple-shape memory effect in a styrene-based shape memory polymer: Characterization, theory and applicationComposites Part B: Engineering, 2019
- Simulation and experimental analysis of autoclave co-curing CFRP hat-stiffened panels with silicone airbag mandrelsIranian Polymer Journal, 2019
- Bending shape recovery of unidirectional carbon fiber reinforced epoxy-based shape memory polymer compositesComposites Part A: Applied Science and Manufacturing, 2019
- Analysis and design of smart mandrels using shape memory polymersComposites Part B: Engineering, 2014
- A review of recent research on mechanics of multifunctional composite materials and structuresComposite Structures, 2010
- Reusable shape memory polymer mandrels2005
- Fibre reinforced composites in aircraft constructionProgress in Aerospace Sciences, 2005
- Experimental and numerical study of the effect of cure cycle, tool surface, geometry, and lay-up on the dimensional fidelity of autoclave-processed composite partsComposites Part A: Applied Science and Manufacturing, 2002