Synthesis and Properties of a Bio‐Based Epoxy Resin with High Epoxy Value and Low Viscosity
- 17 October 2013
- journal article
- research article
- Published by Wiley in ChemSusChem
- Vol. 7 (2) , 555-562
Abstract
A bio‐based epoxy resin (denoted TEIA) with high epoxy value (1.16) and low viscosity (0.92 Pa s, 25 °C) was synthesized from itaconic acid and its chemical structure was confirmed by 1H NMR and 13C NMR spectroscopy. Its curing reaction with poly(propylene glycol) bis(2‐aminopropyl ether) (D230) and methyl hexahydrophthalic anhydride (MHHPA) was investigated. For comparison, the commonly used diglycidyl ether of bisphenol A (DGEBA) was also cured with the same curing agents. The results demonstrated that TEIA showed higher curing reactivity towards D230/MHHPA and lower viscosity compared with DGEBA, resulting in the better processability. Owing to its high epoxy value and unique structure, comparable or better glass transition temperature as well as mechanical properties could be obtained for the TEIA‐based network relative to the DGEBA‐based network. The results indicated that itaconic acid is a promising renewable feedstock for the synthesis of bio‐based epoxy resin with high performance.Keywords
This publication has 38 references indexed in Scilit:
- Progress in development of epoxy resin systems based on wood biomass in JapanPolymer Engineering & Science, 2012
- Preparation and properties of bio-based epoxy networks derived from isosorbide diglycidyl etherPolymer, 2011
- A fully biobased epoxy resin from vegetable oils: From the synthesis of the precursors by thiol‐ene reaction to the study of the final materialJournal of Polymer Science Part A: Polymer Chemistry, 2011
- Rheological cure characterization of a polyfunctional epoxy acrylic resinReactive and Functional Polymers, 2010
- High‐performance biobased epoxy derived from rosinPolymer International, 2010
- Preparation and properties of biocomposites composed of bio‐based epoxy resin, tannic acid, and microfibrillated celluloseJournal of Polymer Science Part B: Polymer Physics, 2010
- Preparation and properties of bio‐based epoxy montomorillonite nanocomposites derived from polyglycerol polyglycidyl ether and ε‐polylysineJournal of Applied Polymer Science, 2009
- Engineering Plastics from Lignin. 22. Cure of Lignin Based Epoxy ResinsThe Journal of Adhesion, 1993
- A modified method for kinetic analysis of thermoanalytical dataJournal of Thermal Analysis and Calorimetry, 1976
- Variation of peak temperature with heating rate in differential thermal analysisJournal of Research of the National Bureau of Standards, 1956