Impact of High Pressure on the Volumetric Efficiency in Motor-Driven Two-Dimensional Piston Pumps
Authors:
Preprint
- 6 August 2024
- preprint
- Published by Springer Nature in Research Square
Abstract
The two-dimensional (2D) piston pump utilizes a cam guide-roller two-degree-of-freedom (2DOF) motion mechanism, making it adaptable to a wide range of variable operating conditions and frequent loaded startups in the context of motor-driven systems. Volumetric efficiency, which measures the ratio of actual to theoretical output flow, is vital for optimizing hydraulic pump performance and reducing energy loss. This study established a mathematical model for the 2D piston pump, considering factors like axial internal and external leakage, circumferential leakage, backflow, fluid compressibility, turbulence, and flow coefficients. The model was built using a co-simulation environment integrating AMESim and Simulink. Simulation results showed that volumetric efficiency increases with higher rotational speeds and decreases with higher pressures. High-pressure backflow is a key factor in adversely affecting volumetric efficiency and requires special attention. Experimental validation was conducted across a speed range of 500--3000 r/min and pressure range of 1--28 MPa. The lowest efficiency recorded was 64.81\% at 500 r/min and 28 MPa, with a maximum deviation of 3.28\% from the simulation. At 3000 r/min and 28 MPa, the efficiency was 89.53\%, deviating by 1.69\% from the simulation. The close correspondence between experimental and simulation results validates the model's reliability in predicting volumetric efficiency.Keywords
All Related Versions
- Version 1, 2024-08-06, Research Square
- Published version: Scientific Reports, 14 (1), 1.
This publication has 19 references indexed in Scilit:
- Dynamic modeling and vibration characteristics of multibody system in axial piston pumpAlexandria Engineering Journal, 2022
- Two-dimensional piston pump: Principle, design, and testing for aviation fuel pumpsChinese Journal of Aeronautics, 2020
- Power loss characteristics analysis of slipper pair in axial piston pump considering thermoelastohydrodynamic deformationLubrication Science, 2019
- Experimental studies of the vibro-acoustic characteristics of an axial piston pump under run-up and steady-state operating conditionsMeasurement, 2019
- Effects of inclined cylinder ports on gaseous cavitation of high-speed electro-hydrostatic actuator pumps: a numerical studyEngineering Applications of Computational Fluid Mechanics, 2019
- Noise source identification and transmission path optimisation for noise reduction of an axial piston pumpApplied Acoustics, 2018
- Validation of a thermal elastohydrodynamic multibody dynamics model of the slipper pad by friction force measurement in the axial piston pumpTribology International, 2017
- The Paris Agreement: a new beginning?Journal of Energy & Natural Resources Law, 2016
- The effect of piston grooves performance in an axial piston pumps via CFD analysisInternational Journal of Mechanical Sciences, 2013
- Valve-Plate Design for an Axial Piston Pump Operating at Low DisplacementsJournal of Mechanical Design, 2003