Conductance-Based Interface Detection for Multi-Phase Pipe Flow
Open Access
Abstract
Sediment and flow depth monitoring in sewers is important for informing flow models and for predicting and mitigating against sewer blockage formation and surcharge. In this study, a novel sensor based on conductance measurement has been developed and tested under a laboratory environment and validated by a finite-element model. The relative conductance is measured between pairs of adjacent electrodes to provide a conductance profile along the sensor length. A piecewise linear relationship between conductance and electrode length was derived and the interface positions between sediment, water, and air can be determined from the profile. The results demonstrated that the root mean square error of the model and the measured interface level are within 1.4% and 2.6% of sensor’s measurement range. An error distribution of interface height shows that all anticipated errors are within the resolution of the electrode length increments. Furthermore, it was found that the conductivity of the measured medium is proportional to the gradient of the linear relationship of conductance and electrode length. It could therefore prove a valuable new tool for the accurate quantification of sediment and flow levels in sewer conduits, coastal environments, drainage systems for transport networks, and other industrial or academic applications.Keywords
This publication has 25 references indexed in Scilit:
- A self-calibration water level measurement using an interdigital capacitive sensorSensors and Actuators A: Physical, 2014
- Coupling acoustic devices for monitoring combined sewer network sediment depositsWater Science & Technology, 2014
- Effects of physical properties on electrical conductivity of compacted lateritic soilJournal of Rock Mechanics and Geotechnical Engineering, 2013
- The pattern of surface waves in a shallow free surface flowJournal of Geophysical Research: Earth Surface, 2013
- Electrical Resistance Tomography for Suspended Sediment Measurements in Open Channel Flows Using a Novel Sensor DesignParticle & Particle Systems Characterization, 2006
- Capacitance sensors for measuring suspended sediment concentrationCATENA, 2005
- General fuzzy piecewise regression analysis with automatic change-point detectionFuzzy Sets and Systems, 2001
- Electrical measurement of sediment layer thickness under suspension flowsExperiments in Fluids, 1999
- Capacitance sensor design for reducing errors in phase concentration measurementsFlow Measurement and Instrumentation, 1998
- A sediment level sensor for erosion and siltation detectionEstuarine, Coastal and Shelf Science, 1992