Effects of Pressure and Temperature on Gas Diffusion and Flow for Primary and Enhanced Coalbed Methane Recovery
Open Access
- 1 August 2014
- journal article
- Published by SAGE Publications in Energy Exploration & Exploitation
- Vol. 32 (4) , 601-619
Abstract
Due to the rapid increase of coalbed methane (CBM) exploration and development activities in China, gas adsorption and flow behavior for Chinese coals are of great interest for the industry and research community. How pressure and temperature affect the gas adsorption and flow on different rank coals are not only important for CBM recovery but also important for CO2 or N2 enhanced CBM recovery, since gases are often injected at a temperature different to the reservoir temperature. In this work, gas adsorption and permeability of three different rank Chinese coals are measured using CH4, N2 and CO2 at three temperatures, 20°C, 35°C and 50°C. Gas diffusivity and permeability with respect to gas species, pore pressure, effective stress and temperature are studied. The three coals are SQB-1 from Southern Qinshui Basin, JB-1 from Junggar Basin and OB-1 from Ordos Basin. Gas adsorption results show that both pressure and temperature have significant impact on adsorption behavior for SQB-1 and JB-1 using CH4. For higher rank coal SQB-1, adsorption isotherm tends to reach adsorption capacity quicker with respect to pressure. However, the maximum adsorption capacity is higher for the lower rank coal JB-1. Moreover, temperature has a stronger effect on reducing adsorption capacity for lower rank coal. Gas diffusivity results for OB-1 and JB-1 show that CO2 diffusivity is generally higher than that of CH4 and then N2. This could be related with their different kinetic diameters and their interaction with the coal. Both pressure and temperature have impact on gas diffusivity. In general, gas diffusivities increase with pressure and temperature. Permeability results show that it varies greatly with respect to coal rank with highest rank coal having the lowest permeability. Permeability is also strongly sensitive to effective stress and pore pressure. Temperature has a noticeable impact on permeability change. Permeability changes differently with temperature increase for the different rank coal samples studied. This may be attributed to the combined effect of coal strain change due to gas adsorption and thermal expansion. These results have significant implications for the design of enhanced CBM recovery and CO2 storage for different rank coals as injecting gas at different temperature and pressure would affect the CO2 injectivity and the CBM production rate.Keywords
This publication has 41 references indexed in Scilit:
- Description of a CO2 Enhanced Coal Bed Methane Field Trial Using a Multi-Lateral Horizontal WellEnergy Procedia, 2013
- Geological controls on prediction of coalbed methane of No. 3 coal seam in Southern Qinshui Basin, North ChinaInternational Journal of Coal Geology, 2011
- Effect of the effective stress coefficient and sorption-induced strain on the evolution of coal permeability: Experimental observationsInternational Journal of Greenhouse Gas Control, 2011
- An analytical coal permeability model for tri-axial strain and stress conditionsInternational Journal of Coal Geology, 2010
- Effect of pressure and temperature on diffusion of CO2 and CH4 into coal from the Lorraine basin (France)International Journal of Coal Geology, 2010
- Influence of moisture content and temperature on methane adsorption isotherm analysis for coals from a low-rank, biogenically-sourced gas reservoirInternational Journal of Coal Geology, 2008
- High-Pressure Adsorption Isotherms of N2, CH4, O2, and Ar on Different Carbonaceous AdsorbentsJournal of Chemical & Engineering Data, 2004
- The effect of pore structure and gas pressure upon the transport properties of coal: a laboratory and modeling study. 2. Adsorption rate modelingFuel, 1999
- Geological controls on coalbed methane reservoir capacity and gas contentInternational Journal of Coal Geology, 1998
- Coalbed methane sorption related to coal compositionInternational Journal of Coal Geology, 1998