CMP at the Wafer Edge – Modeling the Interaction between Wafer Edge Geometry and Polish Performance
Authors:
- 1 January 2005
- journal article
- Published by Springer Nature in MRS Proceedings
- Vol. 867
Abstract
As the drive to improve integrated circuit manufacturing yield continues, renewed attention is being paid to the edge of the wafer. The industry is seeking to reduce the edge exclusion region and achieve good performance to within 2 mm or smaller. This creates substantial challenges, both for CMP and for the starting wafer. In this work, we consider two key elements that play a role in non-uniform polish near the edge of the wafer.First, we study the impact of localized pressure on the edge of the wafer as a function of the wafer and retaining ring pressures, gap separation between wafer and retaining ring, and pad material properties (pad Young's modulus). Simulations show that several millimeters into the wafer from the edge can polish either more quickly or more slowly than the center of the wafer, depending on the combination of these parameters. Second, we also consider the impact of wafer edge roll-off (the specific thickness or front surface elevation of the wafer geometry) on polishing uniformity. We again find that the polish uniformity can be affected dramatically, depending on the details of the starting wafer geometry.We believe that several innovations and optimizations are likely to arise in order to meet future wafer edge polish uniformity requirements. These include tool geometry and process improvements, tailoring of the pad material properties, and starting wafer edge geometry optimization and control.Keywords
This publication has 4 references indexed in Scilit:
- Impact of Wafer Geometry and Thermal History on Pressure and von Mises Stress Non-Uniformity During Chemical Mechanical PlanarizationJapanese Journal of Applied Physics, 2003
- A Contact-Mechanics Based Model for Dishing and Erosion in Chemical-Mechanical PolishingMRS Proceedings, 2001
- Qualitative Prediction of SiO[sub 2] Removal Rates during Chemical Mechanical PolishingJournal of the Electrochemical Society, 2000
- Wear‐Contact Problems and Modeling of Chemical Mechanical PolishingJournal of the Electrochemical Society, 1998