Analysis and Optimization of Dimensional Accuracy and Porosity of High Impact Polystyrene Material Printed by FDM Process: PSO, JAYA, Rao, and Bald Eagle Search Algorithms
Authors:
- Manjunath Patel Gowdru ChandrashekarappaManjunath Patel Gowdru Chandrashekarappa
- Ganesh Ravi ChateGCGanesh Ravi Chate
- Vineeth ParashivamurthyVPVineeth Parashivamurthy
- Balakrishnamurthy Sachin KumarBalakrishnamurthy Sachin Kumar
- Mohd Amaan Najeeb BandukwalaMBMohd Amaan Najeeb Bandukwala
- Annan KaisarAKAnnan Kaisar
- Khaled GiasinKhaled Giasin
- Danil Yurievich PimenovDanil Yurievich Pimenov
- Szymon WojciechowskiSzymon Wojciechowski
Open Access
Abstract
High impact polystyrene (HIPS) material is widely used for low-strength structural applications. To ensure proper function, dimensional accuracy and porosity are at the forefront of industrial relevance. The dimensional accuracy cylindricity error (CE) and porosity of printed parts are influenced mainly by the control variables (layer thickness, shell thickness, infill density, print speed of the fused deposition modeling (FDM) process). In this study, a central composite design (CCD) matrix was used to perform experiments and analyze the complete insight information of the process (control variables influence on CE and porosity of FDM parts). Shell thickness for CE and infill density for porosity were identified as the most significant factors. Layer thickness interaction with shell thickness, infill density (except for CE), and print speed were found to be significant for both outputs. The interaction factors, i.e., shell thickness and infill density, were insignificant (negligible effect) for both outputs. The models developed produced a better fit for regression with an R2 equal to 94.56% for CE, and 99.10% for porosity, respectively. Four algorithms (bald eagle search optimization (BES), particle swarm optimization (PSO), RAO-3, and JAYA) were applied to determine optimal FDM conditions while examining six case studies (sets of weights assigned for porosity and CE) focused on minimizing both CE and porosity. BES and RAO-3 algorithms determined optimal conditions (layer thickness: 0.22 mm; shell thickness: 2 mm; infill density: 100%; print speed: 30 mm/s) at a reduced computation time equal to 0.007 s, differing from JAYA and PSO, which resulted in an experimental CE of 0.1215 mm and 2.5% of porosity in printed parts. Consequently, BES and RAO-3 algorithms are efficient tools for the optimization of FDM parts.Keywords
This publication has 61 references indexed in Scilit:
- Squeeze casting process modeling by a conventional statistical regression analysis approachApplied Mathematical Modelling, 2016
- Mechanical Property Optimization of FDM PLA in Shear with Multiple ObjectivesJOM, 2015
- An investigation on distortion of PLA thin-plate part in the FDM processThe International Journal of Advanced Manufacturing Technology, 2015
- Optimization of fused deposition modeling process parameters: a review of current research and future prospectsAdvances in Manufacturing, 2015
- Influence of various process conditions on surface finishes induced by the direct metal deposition laser technique on a Ti–6Al–4V alloyJournal of Materials Processing Technology, 2013
- Metaheuristics—the metaphor exposedInternational Transactions in Operational Research, 2013
- Performance of cement mortar made with recycled high impact polystyreneCement and Concrete Composites, 2012
- Flexural and impact properties of chemically treated sugar palm fiber reinforced high impact polystyrene compositesFibers and Polymers, 2012
- Investigations for statistically controlled rapid casting solution of low brass alloys using three dimensional printingInternational Journal of Rapid Manufacturing, 2009
- Modeling of the MIG welding process using statistical approachesThe International Journal of Advanced Manufacturing Technology, 2006