Assessment of Deformation Flow in 1050 Aluminum Alloy by the Implementation of Constitutive Model Parameters
Open Access
- 29 March 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (7) , 4359
Abstract
The behavior of technically pure aluminum was examined, and this investigation allowed the determination of the material constants by various models. The model parameters derived were subsequently used for the finite element simulations (FEM) of a cold rolling process. To determine the tuning parameters such as the strain-hardening coefficient K, strain-hardening exponent n, or elastic constant E, a tensile test was performed on the heat-treated sheet of 1050 Al alloy and the experimentally observed deformation behavior was compared to the simulated counterpart. The results of the FEM calculations reveal that the strain-hardening characteristics can be alternatively derived from the Brinell indentation. Additionally, the determined constitutive model parameters (E = 69.8 GPa, K = 144.6 MPa, and n = 0.3) were verified by simulating both the symmetric and asymmetric rolling processes. The distribution of the equivalent strain across the sheet thickness was computed by the FEM, and it was found that the modeled deformation profiles tend to reproduce the experimentally observed ones with high accuracy for different strain modes inasmuch as the mentioned rolling trials accommodate diverse amounts of shear and normal strain components.Keywords
Funding Information
- Ministry of Innovation and Technology of Hungary from the National Research, Development and Innovation Fund (TKP2021-NVA)
This publication has 39 references indexed in Scilit:
- Friction and Forward Slip in High-Speed Cold Rolling Process of Aluminum AlloysApplied Mechanics and Materials, 2012
- Validation of numerical codes for impact and explosion cratering: Impacts on strengthless and metal targetsMeteoritics & Planetary Science, 2008
- Controlling the plastic anisotropy in asymmetrically rolled aluminium sheetsPhilosophical Magazine, 2008
- Cube texture in hot-rolled aluminum alloy 1050 (AA1050)—nucleation and growth behaviorActa Materialia, 2008
- Finite element analysis of tensile testing with emphasis on neckingComputational Materials Science, 2007
- Analytical relations between hardness and strain for cold formed partsJournal of Materials Processing Technology, 2007
- An investigation on strain inhomogeneity in hot strip rolling processJournal of Materials Processing Technology, 2002
- A simple model for dislocation behavior, strain and strain rate hardening evolution in deforming aluminum alloysInternational Journal of Plasticity, 2002
- An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 1992
- Friction-aided strip rolling with unlimited reductionInternational Journal of Machine Tool Design and Research, 1980