The Impact of Additive Manufacturing Constraints and Design Objectives on Structural Topology Optimization
Open Access
- 9 September 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (18) , 10161
Abstract
To analyze the impact of different objective functions and additive manufacturing (AM) constraints on structural topology optimization, it is necessary to perform an in-depth comparative study. This analysis should consider specific structural design factors, such as compliance, volume, or stress minimization, and assess their effects on the topology optimization for AM. In addition, the inclusion of AM constraints can have a significant influence on various aspects, including optimal part geometry, part volume, support structure volume, and structural performance. Thus, it is essential to investigate and compare these factors to determine the optimal part design for AM. This study focuses on comparing topology optimization results obtained using compliance, stress, or multi-objective minimization, with and without AM constraints. A comparative analysis was conducted in the study, utilizing three structural design examples: cantilever beam, bridge-shaped structure, and L-shaped beam. The comparison results provide insights into the effects of build orientation, AM constraints such as overhang, and different design objectives on the structural topology optimization for AM.Keywords
Funding Information
- SIUC startup fund
This publication has 21 references indexed in Scilit:
- Support structure constrained topology optimization for additive manufacturingComputer-Aided Design, 2016
- Topology optimization of 3D self-supporting structures for additive manufacturingAdditive Manufacturing, 2016
- Topology optimization considering overhang constraints: Eliminating sacrificial support material in additive manufacturing through designStructural and Multidisciplinary Optimization, 2016
- Bridging topology optimization and additive manufacturingStructural and Multidisciplinary Optimization, 2015
- An explicit length scale control approach in SIMP-based topology optimizationComputer Methods in Applied Mechanics and Engineering, 2014
- Optimal topology for additive manufacture: A method for enabling additive manufacture of support-free optimal structuresMaterials & Design (1980-2015), 2014
- Design for Additive Manufacturing: Past, Present, and Future DirectionsJournal of Mechanical Design, 2014
- Efficient topology optimization in MATLAB using 88 lines of codeStructural and Multidisciplinary Optimization, 2010
- Topology optimization of periodic microstructures with a penalization of highly localized buckling modesInternational Journal for Numerical Methods in Engineering, 2002
- Generating optimal topologies in structural design using a homogenization methodComputer Methods in Applied Mechanics and Engineering, 1988