Rheokinetic study of acrylic reactive mixtures dedicated to fast processing of fiber‐reinforced thermoplastic composites
- 18 December 2018
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 136 (15)
Abstract
This study focuses on the characterization of acrylic reactive mixtures designed for liquid composite molding (LCM) and yielding thermoplastic matrices for composite applications. Conversion degree, complex viscosity, and cure exothermicity are tracked during the radical polymerization. Results show that these systems suffer from Trommsdorff's effect, that is, the polymerization is highly exothermic. The rheological study also highlights a limit of injectability for LCM processes around a conversion degree of 10%. The vitrification curve, which correlates conversion degree to glass‐transition temperature, has been established for methyl methacrylate/poly(methyl methacrylate) mixtures. It constitutes a useful tool to identify the thermal conditions required to reach a full monomer conversion and thus, to manage the residual monomer content. The use of such acrylic‐based reactive solutions for fast LCM processing appears appropriate as fully polymerized matrices were obtained in less than 5 min at 90 °C. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47391.Keywords
This publication has 62 references indexed in Scilit:
- Theoretical prediction and experimental determination of the effect of mold characteristics on temperature and monomer conversion fraction profiles during polymerization of a PMMA‐based bone cementJournal of Biomedical Materials Research, 2002
- Near-Infrared Spectroscopy for in situ Cure Monitoring of Dimethacrylate-Based NetworksApplied Spectroscopy, 2000
- Evaluation of the Mode of Termination for a Thermally Initiated Free-Radical Polymerization via Matrix-Assisted Laser Desorption Ionization Time-of-Flight Mass SpectrometryMacromolecules, 1997
- Curing of a silane coupling agent and its effect on the transverse strength of autopolymerizing polymethylmethacrylate—glass fibre compositeJournal of Oral Rehabilitation, 1997
- Autoacceleration in Free Radical Polymerization. 2. Molecular Weight DistributionsMacromolecules, 1994
- Autoacceleration in Free Radical Polymerization. 1. ConversionMacromolecules, 1994
- The glass transition temperature (tg) as a parameter for monitoring the cure of an amine/epoxy system at constant heating ratesJournal of Applied Polymer Science, 1990
- Diffusion-Controlled Reactions in Polymer SystemsJournal of Macromolecular Science, Part C: Polymer Reviews, 1987
- Rheokinetics of free-radical polymerizationPolymer, 1984
- Rheology in polymerization processesPolymer Engineering & Science, 1980