Feasibility study on solidification of municipal solid waste incinerator fly ash with circulating fluidized bed combustion coal fly ash
Authors:
- Wenshi LiuWLWenshi Liu
- Haobo HouHHHaobo Hou
- Chuhao ZhangCZChuhao Zhang
- Dajie ZhangDZDajie Zhang
- 7 May 2009
- journal article
- Published by SAGE Publications in Waste Management & Research: The Journal for a Sustainable Circular Economy
- Vol. 27 (3) , 258-266
Abstract
The objective of this study was to assess the feasibility of solidification of municipal solid waste incinerator (MSWI) fly ash with circulation fluidized bed combustion (CFBC) fly ash, which is unsuitable as a cement replacement due to its high amounts of carbon, lime and anhydrite. The solidification process was conducted on samples prepared from MSWI fly ash, binders (cement clinkers and CFBC fly ash were mixed at two replacement ratios) and water (water/solid weight ratio = 0.4), among which the MSWI fly ash replaced each binder at the ratio of 0, 20, 40, 60 and 80% by dry weight. The samples were subjected to compressive strength tests and Toxicity Characteristic Leaching Procedure and the results showed that all solidified MSWI fly ash can meet the landfill standard imposed by US EPA after 28 days of curing. Micro-analysis (X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectrophotometry) revealed that the main hydrate products were C—S—H gel and ettringite, which have a positive effect on heavy metals retention. Therefore, this method provides a possibility to achieve a cheap and effective solution for MSWI fly ash management and use for CFBC fly ash.Keywords
This publication has 26 references indexed in Scilit:
- Utilization of municipal solid waste incineration (MSWI) fly ash in blended cementJournal of Hazardous Materials, 2007
- Evaluation of ettringite and hydrocalumite formation for heavy metal immobilization: Literature review and experimental studyJournal of Hazardous Materials, 2006
- Leaching characteristics of slag from the melting treatment of municipal solid waste incinerator ashJournal of Hazardous Materials, 2006
- Utilization of MSWI fly ash for stabilization/solidification of industrial waste sludgeJournal of Hazardous Materials, 2006
- Effect of leaching conditions and curing time on the leaching of heavy metals in fly ash cement mortarsAdvances in Cement Research, 2002
- Heavy metal speciation and leaching behaviors in cement based solidified/stabilized waste materialsJournal of Hazardous Materials, 2001
- Experimental study of the waste binder anhydrite in the solidification/ stabilization process of heavy metal sludgesJournal of Hazardous Materials, 1998
- Potential application of ettringite generating systems for hazardous waste stabilizationJournal of Hazardous Materials, 1996
- A new way to stabilize fly ash from municipal incineratorsWaste Management, 1996
- Metals Distribution in Solidified/Stabilized Waste Forms after LeachingHazardous Waste and Hazardous Materials, 1992