Experimental Study of Outflow Effects in a Rotating Turbulated Channel
- 19 April 2021
- journal article
- research article
- Published by Wiley in Journal of Turbomachinery
- Vol. 143 (7)
Abstract
The three-pass turbulated serpentine channel has many applications in internal turbine blade systems. However, the studies on the effects of the outflow ratio are lacking, which decreases the thermal analysis accuracy in such a model. To fill this gap, outflow-ratio experiments are conducted on the Nusselt number distributions of a three-pass turbulated channel. The current experimental results can guide and optimize the turbine blade internal cooling system. The results show with the mass flow of the lateral outlet increasing, the low-heat transfer region on the lateral-outflow passage gradually expands. Increasing the mass flow of the lateral outlet heightens the spanwise-averaged Nusselt number of the lateral-outflow passage, especially under the static condition. In the lateral-outflow passage, the rotation significantly improves the Nusselt number uniformity, particularly at the high mass flowrate of the lateral holes; the rotation shows slight effects on the spanwise-averaged Nusselt number of the lateral-outflow passage at low rotation numbers, whereas the profound influence is observed for the spanwise-averaged Nusselt number under high rotation-number condition. The rotation can profoundly increase the pressure coefficient leading to a reduced pressure loss with the rotation number increasing from 0.03 to 0.06.Keywords
Funding Information
- National Natural Science Foundation of China (51776173)
- National Science and Technology Planning Project (2017-Ш-0003-0027)
This publication has 37 references indexed in Scilit:
- Heat transfer in a rotating smooth wedge-shaped channel with lateral fluid extractionApplied Thermal Engineering, 2015
- High Rotation Number Effect on Heat Transfer in a Leading Edge Cooling Channel With Three Channel Orientations2012
- Effect of Channel Orientation in a Rotating Wedge-Shaped Cooling Channel With Pin Fins and Ribs2012
- Effect of Coolant Ejection in Rectangular and Trapezoidal Trailing-Edge Cooling PassagesJournal of Thermophysics and Heat Transfer, 2009
- Heat Transfer in Trailing Edge, Wedge-Shaped Cooling Channels Under High Rotation NumbersJournal of Heat Transfer, 2008
- Trailing-Edge Cooling for Gas TurbinesJournal of Propulsion and Power, 2006
- Turbine Blade Internal Cooling Passages with Rib TurbulatorsJournal of Propulsion and Power, 2006
- Influence of Surface Heat Flux Ratio on Heat Transfer Augmentation in Square Channels With Parallel, Crossed, and V-Shaped Angled RibsJournal of Turbomachinery, 1992
- Augmented heat transfer in a pin fin channel with short or long ejection holesInternational Journal of Heat and Mass Transfer, 1991
- Augmented Heat Transfer in Square Channels With Parallel, Crossed, and V-Shaped Angled RibsJournal of Heat Transfer, 1991