Estimated Position Error Compensation Method Considering Impact of Speed and Load in Permanent Magnet Synchronous Motor Position Sensorless Control Based on High-Frequency Voltage Injection
Authors:
- 1 November 2021
- journal article
- research article
- Published by Institute of Electrical Engineers of Japan (IEE Japan) in IEEJ Journal of Industry Applications
- Vol. 10 (6) , 624-631
Abstract
Recently, high-efficiency permanent magnet synchronous motors (PMSMs) have been used in various fields as the performances of permanent magnets have improved rapidly. PMSM position sensorless control based on high-frequency (HF) voltage injection is investigated herein, where the HF voltage is injected into the fundamental voltage. The HF current response, which includes information on the rotor position, is used for position estimation. There are two problems with this approach: the control becomes unstable as the speed increases and estimated position errors occur under load condition. The study considers the impact of speed and load on position estimation. Based on the consideration, a speed independent detection of HF current amplitude and estimated position error compensations under load condition are proposed. Further, an estimated position error compensation method is proposed by considering the impact of speed and load. Finally, experiments are conducted with an interior PMSM to demonstrate the validity of the proposed methods.Keywords
This publication has 24 references indexed in Scilit:
- Validation of a modified direct-self control strategy for PMSM in railway-traction applicationsIEEE Transactions on Industrial Electronics, 2016
- Effects of Rotor Position Error in the Performance of Field Oriented Controlled PMSM Drives for Electric Vehicle Traction ApplicationsIEEE Transactions on Industrial Electronics, 2016
- PMSM Sensorless Control by Injecting HF Pulsating Carrier Signal Into Estimated Fixed-Frequency Rotating Reference FrameIEEE Transactions on Industrial Electronics, 2015
- Study of Low-Speed Sensorless Control of SPMSM by Controlling the Elliptical InductanceIEEJ Transactions on Industry Applications, 2014
- Novel Sensorless Control Strategy With Injection of High-Frequency Pulsating Carrier Signal Into Stationary Reference FrameIEEE Transactions on Industry Applications, 2013
- Innovative Application Technologies of AC Motor Drive SystemsIEEJ Journal of Industry Applications, 2012
- Sensorless Control of IPMSM: Past, Present, and FutureIEEJ Journal of Industry Applications, 2012
- Analysis of permanent-magnet machine for sensorless control based on high-frequency signal injectionIEEE Transactions on Industry Applications, 2004
- Sensorless drive of surface-mounted permanent-magnet motor by high-frequency signal injection based on magnetic saliencyIEEE Transactions on Industry Applications, 2003
- Using multiple saliencies for the estimation of flux, position, and velocity in AC machinesIEEE Transactions on Industry Applications, 1998