In situ architecting three-dimensional Na3Bi/Na2Te composite network enabling integrated bulk-interface stabilization for long-cycling sodium metal batteries
Authors:
- Dan LiangDLDan Liang
- Junzhou XieJXJunzhou Xie
- Zhimin LaiZLZhimin Lai
- Xiaomin ChengXCXiaomin Cheng
- Jin WeiJWJin Wei
- Kaiwen ZhouKZKaiwen Zhou
- Wenwei WuWWWenwei Wu
- Xuehang WuXWXuehang Wu
Preprint
- 1 August 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
In response to the challenges of uncontrolled dendrite growth, poor interfacial stability, and structural degradation in sodium metal anodes, this study proposes an innovative "bulk-phase integration" strategy for composite electrodes. By triggering an in-situ reaction between Bi2Te3 and sodium metal via a melt-infiltration strategy, a uniformly dispersed sodium metal anode featuring a three-dimensional Na3Bi/Na2Te composite network with biphasic crosslinking (denoted as BT-Na) is successfully fabricated. The Na3Bi phase provides low nucleation overpotential sites for sodium deposition, while the Na2Te phase constructs a high-speed Na+ transport network. The sodium friendly network formed by the cross-linking of the two can effectively buffer the volume stress during cycling, inhibit dendrite growth, and induce the formation of a thin and stable fluorine rich SEI film. The optimized 20BT-Na composite with 20 wt.% Bi2Te3 demonstrates significantly improved performance compared to pristine (pure) sodium metal: symmetric cell achieves stable operation for over 2100 h at 0.5 mA cm−2 – 0.5 mAh cm−2 (compared to less than 100 h for pure Na). Full cells coupled with a Na3V2(PO4)3 cathode maintain 81.29% capacity retention after 2500 cycles at 5 C, corresponding to a minimal decay rate of 0.0075% per cycle. Moreover, it exhibits excellent rate performance within a wide rate range of 0.5 C to 50 C, and there are no obvious dendrites or "dead sodium" deposits on the surface of the electrode after cycling, indicating good structural integrity. This work offers a promising approach toward highly stable sodium metal anodes.Keywords
This publication has 21 references indexed in Scilit:
- Synergistic modulation of bulk and interface structures in Ni-Mn-based O3-type cathodes via dual-Y strategy for highly stable sodium-ion batteriesCeramics International, 2025
- Investigation on the effect of metal incorporation in metal selenide nanoparticles and their encapsulation in hollow carbon nanospheres on improving the sodium-ion battery performanceChemical Engineering Journal, 2025
- Recent Trends in Artificial SEI Layers for Controlling Dendrite Formation and Enhancing Cycle Life: Toward Stable and Durable Sodium Metal BatteriesSmall, 2025
- Robust CoP2-C hollow nanoboxes: Superior anodes for Li- and Na-ion batteriesJournal of Energy Storage, 2023
- Recent advanced development of stabilizing sodium metal anodesGreen Energy & Environment, 2023
- Stabilize Sodium Metal Anode by Integrated Patterning of Laser‐Induced Graphene with Regulated Na Deposition BehaviorSmall, 2023
- Highly Sodiophilic, Defect‐Rich, Lignin‐Derived Skeletal Carbon Nanofiber Host for Sodium Metal BatteriesAdvanced Energy Materials, 2022
- Highly stable Na metal anode enabled by a multifunctional hard carbon skeletonCarbon, 2021
- Dendrite‐Free Sodium Metal Anodes Enabled by a Sodium Benzenedithiolate‐Rich Protection LayerAngewandte Chemie International Edition, 2020
- Sodium metal anodes for room-temperature sodium-ion batteries: Applications, challenges and solutionsEnergy Storage Materials, 2019