Microstructure of a chrome-boriding of induction hardened DIN Ck 45 steel
Author:
- 1 November 2022
- journal article
- research article
- Published by Walter de Gruyter GmbH in Materials Testing
- Vol. 64 (11) , 1645-1650
Abstract
In this study, boriding of DIN Ck 45 steel, which is hard chrome plated after induction hardening, is used as a linear shaft in 3D printers. The boriding treatment, which was carried out by the pack-boriding method, was carried out in an atmosphere-controlled furnace at 1273 K for 2 h. The thickness, morphology, hardness, and chemical composition of the boride layer formed on the sample surface as a result of the boriding process using Ekabor 2 boriding agent were examined and compared with the un-borided sample. The microstructure images were obtained with a digital camera integrated into an optical microscope, and these images were analyzed in detail with the help of an image analysis program. After the optical microscope examinations were completed, point EDX analyzes were performed on the image obtained with the help of SEM. As a result of EDX analysis, it was determined that the layer formed on the material surface was only chromium boride formed by the interaction of chromium and boron element. Finally, the hardness measurements of the borided sample were carried out with the help of Vickers indenter and then differences were compared with the un-borided sample.Keywords
This publication has 14 references indexed in Scilit:
- A study of the microstructures and performance of chromium boride coatings on AISI 52100 steelMateriali in tehnologije, 2018
- Production of Chromium Boride Layers on Carbon Steel with Conversion Treatment: Chromium Deposition + Diffusion AnnealingActa Physica Polonica A, 2017
- A novel RE-chrome-boronizing technology assisted by fast multiple rotation rolling treatment at low temperatureApplied Surface Science, 2015
- The Fracture Toughness of Fe2B Formed on Boronized AISI 304Materials Testing, 2014
- Kinetic Investigations of Boronized Cold Work Tool SteelsMaterials Testing, 2014
- Modelling and Design a Controller for Improving the Plating Performance of a Hard Chromium Electroplating Process2014
- Mechanical properties of duplex layer formed on AISI 403 stainless steel by chromizing and boronizing treatmentSurface and Coatings Technology, 2004
- Advanced Techniques for Surface Engineering1992
- The B−Cr (Boron-Chromium) systemBulletin of Alloy Phase Diagrams, 1986
- Theoretical and experimental study of stationary and progressive induction hardeningJournal of Heat Treating, 1985