Tribological analyses of a new optimized gearbox biodegradable lubricant blended with reduced graphene oxide nanoparticles
- 14 May 2020
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 235 (5) , 901-915
Abstract
The current work aims to develop a biodegradable lubricant by adding different volume percentages of cashew nut shell liquid (CNSL) in neat castor oil (NCO) and investigating its possibility as replacement to non-biodegradable mineral oil (commercial mineral oil) in industrial applications. The blend exhibiting better tribological properties was additived with different weight percentages of reduced graphene oxide (r-GO) nano-platelets and further tribological tests were performed. The performance of 40%CNSL+NCO was 45.8% better than commercial mineral oil, and with the addition of the 0.5% r-GO in the blend, the performance was improved by 61.7% than the commercial mineral oil. Finally, the novel biodegradable mixture blended with nanoparticles was employed as a lubricant in a gearbox, proving the superiority of the biodegradable lubricant over the commercial mineral oil.Keywords
This publication has 79 references indexed in Scilit:
- Mechanism of friction reduction of unsaturated fatty acids as additives in diesel fuelsFriction, 2013
- Viscosity modification of different vegetable oils with EVA copolymer for lubricant applicationsIndustrial Crops and Products, 2010
- Influence of fatty acid composition on the tribological performance of two vegetable‐based lubricantsJournal of Synthetic Lubrication, 2007
- Lubricant oils additivated with polymers in EHD contacts: Part 2. Tests using a four‐ball machineLubrication Science, 2005
- Lubricant oils additivated with polymers in EHD contacts: Part 1. Rheological behaviourLubrication Science, 2004
- Boron nitride as a lubricant additiveWear, 1999
- A Numerical Solution of the Thermal Elastohydrodynamic Lubrication in an Elliptical ContactJournal of Lubrication Technology, 1982
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part III—Fully Flooded ResultsJournal of Lubrication Technology, 1977
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part II—Ellipticity Parameter ResultsJournal of Lubrication Technology, 1976
- Isothermal Elastohydrodynamic Lubrication of Point Contacts: Part 1—Theoretical FormulationJournal of Lubrication Technology, 1976