Highly‐Effective Thermoelectric Cooling for Power Semiconductor Devices Packed with Thermal‐Expansion Offset and Flame Retardancy Epoxy Resin
Authors:
- 22 May 2025
- journal article
- Published by Wiley in Advanced Functional Materials
- Vol. 35 (38)
Abstract
The high‐power‐density and high‐temperature operation of third‐generation power semiconductor devices (e.g., SiC/GaN) is limited by epoxy resin (EP)‐based packaging materials due to three key challenges: (1) Low thermal conductivity brings heat accumulation; (2) High interfacial stress from the ≈ 20 times higher thermal expansion coefficient of EP versus SiC/GaN causes thermal cycling‐induced interfacecracks, significant performance or lifespan degradation and even device failure; (3) The flammable nature of EP enhances the risk factor caused by thermal runaway. Herein, a thermal‐expansion offset and flame retardant Zn 1.5 Cu 0.5 P 2 O 7 (ZCPO) is design with a negative thermal expansion coefficient of ‐20 × 10 −6 / °C, within temperature ranges of 20 ∼ 190 °C, which enables to achieve a ceramic‐like thermal expansion coefficient (4 × 10 −6 / °C) and UL‐94 V‐0 rating flame retardancy in ZCPO/EP‐61 composite for the first time. The perfectly matched thermal expansion coefficient minimizes the interfacial stress between EP and chips or thermoelectric cooler, thus a simple thermoelectric cooling architecture is designed for power semiconductor device without thermal interface material 2 (TIM2), which enables to achieve a cooling temperature of 26.85 °C, 8 °C lower than that with TIM2 (18.89 °C).Keywords
Funding Information
- National Natural Science Foundation of China (52271215)
- National Natural Science Foundation of China (92163211)
- Fundamental Research Funds for the Central Universities (2024BRB010)
This publication has 47 references indexed in Scilit:
- Thermal interface materials: From fundamental research to applicationsSusmat, 2024
- Effects of functional modification on the thermal and mechanical properties of h-BN/epoxy nanocompositesMacromolecular Research, 2024
- Heterostructured Graphene@Silica@Iron Phenylphosphinate for Fire‐Retardant, Strong, Thermally Conductive Yet Electrically Insulated Epoxy NanocompositesSmall, 2024
- Interfacial coordination-assisted construction of mechanically robust, fluorescent and intumescent flame retardant epoxy resinsChemical Engineering Journal, 2023
- High-performance epoxy nanocomposites via constructing a rigid-flexible interface with graphene oxide functionalized by polyetheramine and f-SiO2Carbon, 2023
- MXene‐Layered Double Hydroxide Reinforced Epoxy Nanocomposite with Enhanced Electromagnetic Wave Absorption, Thermal Conductivity, and Flame Retardancy in Electronic PackagingSmall, 2023
- Enhanced electromagnetic wave absorption, thermal conductivity and flame retardancy of BCN@LDH/EP for advanced electronic packing materialsChemical Engineering Journal, 2023
- Al2O3/h‐BN/epoxy based electronic packaging material with high thermal conductivity and flame retardancyJournal of Applied Polymer Science, 2022
- High performance epoxy resin with ultralow coefficient of thermal expansion cured by conformation-switchable multi-functional agentChemical Engineering Journal, 2022
- Surface functionalization of few-layer black phosphorene and its flame retardancy in epoxy resinChemical Engineering Journal, 2020