Effect of Elevated Temperature on Mechanical Properties of High-Volume Fly Ash-Based Geopolymer Concrete, Mortar and Paste Cured at Room Temperature
Open Access
Abstract
This paper presents results from experimental work on mechanical properties of geopolymer concrete, mortar and paste prepared using fly ash and blended slag. Compressive strength, splitting tensile strength and flexural strength tests were conducted on large sets of geopolymer and ordinary concrete, mortar and paste after exposure to elevated temperatures. From Thermogravimetric analyzer (TGA), X-ray diffraction (XRD), Scanning electron microscope (SEM) test results, the geopolymer exhibits excellent resistance to elevated temperature. Compressive strengths of C30, C40 and C50 geopolymer concrete, mortar and paste show incremental improvement then followed by a gradual reduction, and finally reach a relatively consistent value with an increase in exposure temperature. The higher slag content in the geopolymer reduces residual strength and the lower exposure temperature corresponding to peak residual strength. Resistance to elevated temperature of C40 geopolymer concrete, mortar and paste is better than that of ordinary concrete, mortar and paste at the same grade. XRD, TGA and SEM analysis suggests that the heat resistance of C–S–H produced using slag is lower than that of sulphoaluminate gel (quartz and mullite, etc.) produced using fly ash. This facilitates degradation of C30, C40 and C50 geopolymer after exposure to elevated temperatures.Keywords
This publication has 54 references indexed in Scilit:
- Shear behaviour of geopolymer concrete beams without stirrupsConstruction and Building Materials, 2017
- Investigation of early compressive strength of fly ash-based geopolymer concreteConstruction and Building Materials, 2016
- Thermal behavior and mechanical properties of geopolymer mortar after exposure to elevated temperaturesConstruction and Building Materials, 2016
- Technical and commercial progress in the adoption of geopolymer cementMinerals Engineering, 2012
- Environmental impact of cement production: detail of the different processes and cement plant variability evaluationJournal of Cleaner Production, 2010
- Damage behavior of geopolymer composites exposed to elevated temperaturesCement and Concrete Composites, 2008
- Comparative performance of geopolymers made with metakaolin and fly ash after exposure to elevated temperaturesCement and Concrete Research, 2007
- Binding and cleavage studies of two proteins intercalated at the galleries of α-zirconium phosphateMicroporous and Mesoporous Materials, 2004
- Alkali activation of Australian slag cementsCement and Concrete Research, 1999
- GeopolymersJournal of Thermal Analysis and Calorimetry, 1991