A spring‐driven press device for hot embossing and thermal bonding of PMMA microfluidic chips
Authors:
- 23 July 2010
- journal article
- microfluidics and-miniaturization
- Published by Wiley in Electrophoresis
- Vol. 31 (15) , 2512-2519
Abstract
A novel spring-driven press device was designed and manufactured for hot embossing and thermal bonding of PMMA microfluidic chips in this work. This simple device consisted of two semi-cylinder silicone rubber press heads, three steel clamping plates, and three compression springs that were assembled together using two screw bolts and two butterfly nuts. The three springs were clamped between the upper and the middle clamping plates, whereas the two press heads were assembled between the middle and the lower clamping plates. After an epoxy template covered by a PMMA plate or a PMMA channel plate together with a cover were sandwiched between two microscopic glass slides for embossing or bonding, respectively, they were clamped between the two elastic press heads of the press device by fastening the screw nuts on the upper clamping plate. Because the convex press heads applied pressure along the middle line of the glass slides, they would deform resulting in a negative pressure gradient from the middle to the sides so that air bubbles between the sandwiched parts could be squeezed out during embossing and bonding processes. High-quality PMMA microfluidic chips were prepared by using this unique device and were successfully applied in the electrophoretic separation of several cations.Keywords
This publication has 39 references indexed in Scilit:
- Fabrication of PMMA microfluidic chips using disposable agar hydrogel templatesElectrophoresis, 2009
- Fabrication of PMMA CE microchips by infrared‐assisted polymerizationElectrophoresis, 2008
- Microfluidic chip made of COP (cyclo-olefin polymer) and comparion to PMMA (polymethylmethacrylate) microfluidic chipJournal of Materials Processing Technology, 2008
- Rapid prototyping of poly(methyl methacrylate) microfluidic systems using solvent imprinting and bondingJournal of Chromatography A, 2007
- Fabrication of a gold microelectrode for amperometric detection on a polycarbonate electrophoresis chip by photodirected electroless platingElectrophoresis, 2006
- Fabrication of poly(methyl methacrylate) capillary electrophoresis microchips by in situ surface polymerizationLab on a Chip, 2005
- Patterned Solvent Delivery and Etching for the Fabrication of Plastic Microfluidic DevicesAnalytical Chemistry, 2005
- Direct-write laser micromachining and universal surface modification of PMMA for device developmentSensors and Actuators B: Chemical, 2004
- Polymer microfluidic devicesTalanta, 2002
- Injection molding and related techniques for fabrication of microstructuresMicrosystem Technologies, 1997