Towards the Development of Predictive Models for the System Design and Modal Analysis of Acoustic Emission Based Technologies
Authors:
- 1 July 2012
- journal article
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 518, 396-406
Abstract
Acoustic Emission (AE) techniques are used for the structural health monitoring (SHM) of civil, aeronautic and aerospace structures. In order to depart from the traditional reliance on parameter based analysis, AE diagnostic techniques require the analysis of wave propagation phenomena and the use of predictive modelling tools to improve the monitoring capabilities and provide reliable health monitoring. Additionally, modal based techniques offer potential for optimization of sensor networks in terms of sensor placement and number of sensors, increased source location accuracy and to get an insight into the source mechanisms. If the modes of propagation can be recognised in the received AE signals, then it would be possible to discriminate between damage types. On that account, the present paper develops two methodologies that are useful tools for the investigation and design of wave propagation based SHM systems established upon modal analysis. Firstly, a higher order plate theory for modelling disperse solutions in elastic and viscoelastic fibre-reinforced composites is proposed in order to investigate the radiation and attenuation of Lamb waves in anisotropic media. Second, spectral flat shell elements are used for the simulation of guided waves in shell structures. Numerical simulations and experiments validate the models and demonstrate that material anisotropy has a strong influence on the velocities, attenuation and acoustic energy for the different modes of propagation. It is expected that the presented methodologies may contribute to offer a higher computational efficiency and simplicity in comparison to traditional methods, and enable the design shortening time and cost of development of Lamb wave based damage detection systems for a rapid transfer from laboratory to in-service structures.Keywords
This publication has 15 references indexed in Scilit:
- Computational aspects of guided wave based damage localization algorithms in flat anisotropic structuresSmart Structures and Systems, 2012
- A viscoelastic plate theory for the fast modelling of Lamb wave solutions in NDT/SHM applicationsUltrasound, 2011
- A modelling approach for virtual development of wave based SHM systemsJournal of Physics: Conference Series, 2011
- Automated detection of delamination and disbond from wavefield images obtained using a scanning laser vibrometerSmart Materials and Structures, 2011
- Spectral element modelling of wave propagation in isotropic and anisotropic shell-structures including different types of damageIOP Conference Series: Materials Science and Engineering, 2010
- Time-Domain Spectral Element Method for Built-In Piezoelectric-Actuator-Induced Lamb Wave Propagation AnalysisAIAA Journal, 2008
- Modelling of Lamb waves for damage detection in metallic structures: Part I. Wave propagationSmart Materials and Structures, 2003
- Connection machine simulation of ultrasonic wave propagation in materials III: The three-dimensional caseWave Motion, 1997
- Phonon-focusing effect with laser-generated ultrasonic surface wavesPhysical Review B, 1993
- A spectral element method for fluid dynamics: Laminar flow in a channel expansionJournal of Computational Physics, 1984