Surface and interfacial characteristics of similar and dissimilar adhesively bonded metal joints after post-bonding moisture exposure
Authors:
- Yongsoon ShinYSYongsoon Shin
- Yao QiaoYao Qiao
- Sridhar NivertySNSridhar Niverty
- Ethan K. NickersonENEthan K. Nickerson
- Roberts J. SeffensRSRoberts J. Seffens
- Miroslava PetersonMPMiroslava Peterson
- Jose L. RamosJRJose L. Ramos
- Justin L. OlsonJOJustin L. Olson
- Mary GilliamMGMary Gilliam
- Kevin SimmonsKSKevin Simmons
- Vineet V. JoshiVineet V. Joshi
Preprint
- 2 July 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
This work investigates the effects of post-bonding moisture exposure on the multiscale bonding behavior of both similar and dissimilar adhesively bonded metal joints, using AA6061–AA6061 and AA6061–DP590 Double Cantilever Beam (DCB) joints as examples. The investigated moisture exposure significantly reduced the bonding performance of both joints, as reflected by reductions in peak load and failure displacement, and changed the failure mode from dominant cohesive failure in the adhesive for as-received joints to dominant interfacial failure after post-bonding moisture exposure. Such interfacial failure can occur microscopically within the oxide layer, as demonstrated by the damage path across the oxide layer and along the interface between the oxide layer and the adhesive. This phenomenon was attributed to moisture-induced restructuring of the oxide layers due to oxidation and hydration, which weakened the oxide layers on both metal surfaces. Detailed investigation of the surface chemistry and oxide layers on metal surfaces after moisture exposure provided insightful results for studying surface modification methods, such as plasma and laser treatments, to mitigate moisture-induced degradation of metal joints.Keywords
This publication has 39 references indexed in Scilit:
- Pre-bonding morphological and chemical changes of laser ablated aluminum surfaces and effects of humidity on adhesive bondingApplied Surface Science, 2025
- Mode I tensile fracture behavior of adhesively-bonded metal–metal, metal–CFRP, and CFRP–CFRP bi-material combinations analyzed by size effect methodComposites Part A: Applied Science and Manufacturing, 2022
- Characterization of anisotropic moisture absorption in polymeric composites using hindered diffusion modelComposites Part A: Applied Science and Manufacturing, 2012
- Relation of swelling and Tg depression to the apparent free volume of a particle‐filled, epoxy‐based adhesiveJournal of Applied Polymer Science, 2002
- Functionalized plasma polymer coatings for improved durability of aluminium-epoxy adhesive joints: fractographySurface and Interface Analysis, 2000
- Irreversible interactions between water and DGEBA/DDA epoxy resin during hygrothermal agingJournal of Applied Polymer Science, 1997
- Diffusion of water into an epoxy adhesive: comparison between bulk behaviour and adhesive jointsInternational Journal of Adhesion and Adhesives, 1995
- Reactivite du dicyandiamide vis a vis des groupements O et N-epoxyde—1. Mecanisme reactionnelEuropean Polymer Journal, 1991
- Environmental degradation of an epoxy resin matrixJournal of Applied Polymer Science, 1986
- The application of x-ray photo-electron spectroscopy to a study of interfacial composition in corrosion-induced paint de-adhesionCorrosion Science, 1981