Do we need perfect mixing between fuel and oxidizer to maximize the energy release rate of energetic nanocomposites?
- 2 January 2023
- journal article
- conference paper
- Published by AIP Publishing in Applied Physics Letters
- Vol. 122 (1) , 011901
Abstract
It is well accepted that close assembly between a fuel and an oxidizer can increase the interfacial contact-area and reduce the diffusion distances, which can significantly promote a heterogeneous reaction. However, we recently observed for nanocomposites of Al/PVDF (aluminum/polyvinylidene fluoride), that if we separated some of the PVDF to form a laminated structure, the flame propagation rate is significantly increased compared to the homogenous case. To probe the mechanism behind this, we used functionalized aluminum nanoparticles to create microsized aggregates of Al-rich and PVDF-rich regions to induce the inhomogeneity and also fabricated Al/PVDF laminate structure films to control the inhomogeneity systematically. The result demonstrates that the inhomogeneous mixing between Al and PVDF can significantly increase the flame front corrugation (burning area). This presumably occurs due to variations in the microburn rate (local burn velocity vectors at the flame front on the microscale). The benefit of the enhanced flame area can apparently overcome the effects of the decrease in the contact area, leading to enhanced burning for an inhomogeneously mixed system. Finally, fluorocarbon functionalization of Al particles can further increase the microburn rate.Keywords
This publication has 15 references indexed in Scilit:
- Combustion of 3D printed 90 wt% loading reinforced nanothermiteCombustion and Flame, 2020
- Why does adding a poor thermal conductor increase propagation rate in solid propellants?Applied Physics Letters, 2019
- Experimental effective metal oxides to enhance boron combustionCombustion and Flame, 2019
- Tuning the morphological, ignition and combustion properties of micron-Al/CuO thermites through different synthesis approachesCombustion and Flame, 2018
- High speed 2-dimensional temperature measurements of nanothermite composites: Probing thermal vs. Gas generation effectsJournal of Applied Physics, 2018
- Direct Deposit Laminate Nanocomposites with Enhanced Propellent PropertiesACS Applied Materials & Interfaces, 2015
- Metal-based reactive nanomaterialsProgress in Energy and Combustion Science, 2009
- Combustion characteristics of boron nanoparticlesCombustion and Flame, 2009
- Metal particle combustion and nanotechnologyProceedings of the Combustion Institute, 2009
- Oxidation behavior of aluminum nanopowdersJournal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 1995