The Effect of Morphology Changes and Mechanical Stresses on the Effective Diffusivity of Solid Electrolyte for Lithium Ion Batteries
Authors:
- Mamun Al-SirajMAMamun Al-Siraj
- Peter SteinPSPeter Stein
- Bai-Xiang XuBXBai-Xiang Xu
- 2 January 2020
- journal article
- research article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 167 (2) , 020535
Abstract
We investigate the impact of mechanical deformation and stresses on the effective diffusivity of polymer electrolytes for solid-state batteries. To that end, we pursue a staggered approach and compute the stresses and the deformation within composite electrodes through finite-deformation thermoelastic calculations. Considering a stress-coupled diffusion model and computational homogenization, we then determine the effective diffusivity of lithium within the polymer phase as a function of active volume fraction, deformation, and stress field. Under lithiation, the embedded active material is expanding and deforms the polymer matrix. The ionic pathways through the microstructure thus progressively narrow down, reducing the electrolyte’s effective diffusivity. This effect is nearly linearly correlated with the particle volume fraction, suggesting the existence of a critical volume fraction above which ionic transport becomes negligible. The inhomogeneous stresses within the microstructure further exacerbate this behavior as they can effectively trap ions in regions of high tensile stresses. This imposes hard limits on the attainable capacity of solid-state batteries. Trying to enhance their overall capacity through increasing the active material volume fraction, one might thus inadvertently cause a progressive cutoff of the ionic transport. Careful design of the electrode microstructure or tailored material composition might however allow to mitigate this effect.Keywords
Funding Information
- German Research Foundation (398072825)
This publication has 66 references indexed in Scilit:
- A Highly Reversible Nano‐Si Anode Enabled by Mechanical Confinement in an Electrochemically Activated LixTi4Ni4Si7 MatrixAdvanced Energy Materials, 2012
- Structure and Properties of Li−Si Alloys: A First-Principles StudyThe Journal of Physical Chemistry C, 2011
- Percolation–tunneling modeling for the study of the electric conductivity in LiFePO4 based Li-ion battery cathodesJournal of Power Sources, 2011
- Quantifying the effects of strains on the conductivity and porosity of LiFePO4 based Li-ion composite cathodes using a multi-scale approachComputational Materials Science, 2011
- Gmsh: A 3‐D finite element mesh generator with built‐in pre‐ and post‐processing facilitiesInternational Journal for Numerical Methods in Engineering, 2009
- Numerical Simulation of Intercalation-Induced Stress in Li-Ion Battery Electrode ParticlesJournal of the Electrochemical Society, 2007
- Nano- and bulk-silicon-based insertion anodes for lithium-ion secondary cellsJournal of Power Sources, 2007
- Structural Changes in Silicon Anodes during Lithium Insertion/ExtractionElectrochemical and Solid-State Letters, 2004
- Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion CellJournal of the Electrochemical Society, 1993
- All‐Solid Lithium Electrodes with Mixed‐Conductor MatrixJournal of the Electrochemical Society, 1981