Adequacy of binary fluid and turbulator based natural circulation loop in parabolic trough collector
Open Access
- 1 January 2022
- journal article
- research article
- Published by International Journal of Renewable Energy Research in International Journal of Renewable Energy Research
- Vol. 12 (V12i4) , 1819-1830
Abstract
The natural circulation loop (NCL) is in the limelight due to its sustainable and reliable mechanism. It finds application mainly in nuclear and solar thermal power plants. However, the low flow rate of fluid within the loop and instability causes a hindrance to their widespread applications. Hence many instability restraining and heat transfer augmentation techniques have been studied, including the recent innovations viz. binary fluid and turbulators. In the present experimental study, a horizontal heater horizontal cooler loop of Lt/d ratio 300 is constructed and initially tested with water to validate the loop behavior with Vijayan correlation. Later, the wire coil having a pitch ratio 4 is inserted in the heater region, and its influence is studied for the heat input range of 200 W to 600 W. The heat transport efficiency improvement ranges from 20 to 22% in the laminar region and 5 to 8 % in other regions with decreased mass flow rate penalty. Even binary fluid (40% acetone + 60% water) is tested for the same heat input range. For 200 W to 500 W heat input, the loop is neutrally stable and at 600 W, pulsation of loop fluid flow with high magnitude is noticed. Binary fluid enhanced the mass flow rate, but heat transfer has not improved because of acetone’s low specific heat value. Finally, future scope, like the use of discretized turbulator and high density secondary fluid, is suggested to enhance the NCL performance and thereby the efficiency of the parabolic trough collector.Keywords
This publication has 28 references indexed in Scilit:
- Heat transfer enhancement of the f-MWCNT- Fe2O3/Water hybrid nanofluid with the combined effect of wire coil with twisted tape and perforated twisted tapeInternational Journal of Thermal Sciences, 2022
- Numerical analysis on heat transfer enhancement of sCO2 in the tube with twisted tapeNuclear Engineering and Design, 2022
- Stabilization of single phase rectangular natural circulation loop of larger diameter using orifice plateInternational Communications in Heat and Mass Transfer, 2022
- Heat transfer augmentation in a tube with conical wire coils using a mixture of ethylene glycol/water as a fluidInternational Journal of Thermal Sciences, 2022
- The heat transfer enhancement techniques and their Thermal Performance FactorBeni-Suef University Journal of Basic and Applied Sciences, 2018
- A review of heat transfer and fluid flow mechanism in heat exchanger tube with insertsChemical Engineering and Processing - Process Intensification, 2018
- CFD Simulation of an Intermediate Temperature, Two-phase Loop Thermosiphon for Use as a Linear Focus Solar ReceiverEnergy Procedia, 2017
- Heat transfer performance of closed loop pulsating heat pipes with methanol-based binary mixturesExperimental Thermal and Fluid Science, 2016
- Thermo-hydrodynamics of closed loop pulsating heat pipe: an experimental studyJournal of Mechanical Science and Technology, 2014
- Steady state and stability characteristics of single-phase natural circulation in a rectangular loop with different heater and cooler orientationsExperimental Thermal and Fluid Science, 2007