Comparison of Various Analysis Methods Based on Heat Flowmeters and Infrared Thermography Measurements for the Evaluation of the In Situ Thermal Transmittance of Opaque Exterior Walls
Open Access
Abstract
There are several methods to obtain the in situ thermal transmittance value (U-value) of building envelopes from on-site data, including the three approaches of the progressive average method, average method considering the thermal storage effect, and dynamic method for deriving the U-value from heat flowmeter (HFM) measurements and the four methods with different formulas to analyze infrared thermography (IRT) measurement data. Since each of these methods considers different parameters and the non-steady characteristics of the heat transfer in building walls in their own way, discrepancies may occur among the obtained results. This study evaluates and compares the in situ U-values by using various methods of analyzing HFM and IRT measurement data. Further, by investigating buildings with similar materials and identical stratigraphies, but with different construction years, we analyze the discrepancy between the designed and measured values caused by material deterioration and evaluate the errors according to the analysis method. The percentage deviation between the U-values obtained by the three methods from the HFM data is found to be satisfactory, being within 10%. When compared with the results of the progressive average method, the deviations for the four different IRT-measurement-based methods vary greatly, being in the range of 6–43%.Keywords
This publication has 24 references indexed in Scilit:
- Diagnosis of Buildings’ Thermal Performance - A Quantitative Method Using Thermography Under Non-steady State Heat FlowEnergy Procedia, 2015
- In Situ Thermal Transmittance Measurements for Investigating Differences between Wall Models and Actual Building PerformanceSustainability, 2015
- Factors affecting the in situ measurement accuracy of the wall heat transfer coefficient using the heat flow meter methodEnergy and Buildings, 2015
- Infrared thermography (IRT) applications for building diagnostics: A reviewApplied Energy, 2014
- Evaluating in situ thermal transmittance of green buildings masonries—A case studyCase Studies in Construction Materials, 2014
- Assessment of the thermal emissivity value of building materials using an infrared thermovision technique emissometerEnergy and Buildings, 2013
- A measuring campaign of thermal conductance in situ and possible impacts on net energy demand in buildingsEnergy and Buildings, 2013
- In situ measuring and evaluating the thermal resistance of building constructionEnergy and Buildings, 2008
- Infrared thermography for building diagnosticsEnergy and Buildings, 2002
- Assessing the thermal insulation of old buildings—The need for in situ spot measurements of thermal resistance and planar infrared thermographyEnergy Conversion and Management, 1998