The Influence of Fibers on the Flexural and Tensile Properties of Asphalt Mastic Based on Finite Element Simulation
Open Access
Abstract
To improve the low-temperature crack resistance of asphalt pavement, this paper investigates the effects of fiber length, content, and type on the flexural and tensile properties of asphalt mastic. Firstly, a numerical program was developed in MATLAB to establish a three-dimensional finite element model of asphalt mastic with an uneven fiber distribution in ABAQUS. Then, the Burgers model selected for simulation was obtained through the asphalt low-temperature bending beam rheological test (BBR). Constructing a three-point bending virtual test of asphalt mastic using a three-dimensional fiber model and systematically analyzing the influence of fiber parameters on bending and tensile properties. The accuracy of the three-dimensional fiber model was verified through BBR experiments. The finite element simulation results show that the addition of fibers can significantly improve the tensile performance of asphalt mastic; increasing the fiber content or length can reduce the peak stress at the bottom of the mid-span and delay cracking. The higher the fiber elastic modulus, the smaller the vertical displacement of the specimen. The model established in this article can effectively elucidate the mechanism of fiber reinforcement, providing a theoretical basis for optimizing fiber parameters and improving the crack-resistance performance of asphalt pavement.Keywords
Funding Information
- Doctoral Research Startup Fund Project of Liaoning Provincial (2025-BS-0509)
- Department of Education of Liaoning Province (LJ212410154027)
- Liaoning University of Technology College Students Innovation Training Program (X202510154069)
- Basic Research Program of Shanxi Province (202303021222007)
- State Key Laboratory of Materials Low-Carbon Recycling (MLCR-2025KF-011)
- Natural Science Foundation of Beijing Municipality (8244054)
This publication has 38 references indexed in Scilit:
- Investigating Low-Temperature Cracking Behavior of Fiber-Reinforced Asphalt Concrete MaterialsInternational Journal of Pavement Research and Technology, 2023
- An experimental testing and analysis procedure to determine linear viscoelastic properties of asphalt binder microstructural componentsConstruction and Building Materials, 2020
- Evaluation of low temperature performance for SBS/CR compound modified asphalt binders based on fractional viscoelastic modelConstruction and Building Materials, 2019
- Investigation of Prony series model related asphalt mixture properties under different confining pressuresConstruction and Building Materials, 2018
- Numerical analysis of the rheological behaviors of basalt fiber reinforced asphalt mortar using ABAQUSConstruction and Building Materials, 2017
- Damage and fracture characterization of asphalt concrete mixtures using the equivalent micro-crack stress approachConstruction and Building Materials, 2017
- Evaluation of self-healing of asphalt concrete through induction heating and metallic fibersConstruction and Building Materials, 2017
- Rheological Properties of Polypropylene Reinforced Asphalt BinderTransportation Infrastructure Geotechnology, 2016
- Laboratory investigation on the brucite fiber reinforced asphalt binder and asphalt concreteConstruction and Building Materials, 2015
- Fiber-reinforced asphalt-concrete – A reviewConstruction and Building Materials, 2010