Effect of Residual Stress Induced by Different Cooling Methods in Heat Treatment on the Fatigue Crack Propagation Behaviour of GH4169 Disc
Open Access
Abstract
In this study, the effects of residual stress induced by three different cooling methods during heat treatment on the crack propagation behaviour of the GH4169 disc were investigated. Different levels of stress fields were induced to the specially designed discs by using air cooling (AC), air jetting cooling (AJC) and water quenching (WQ) methods and were quantitated by numerical simulation. These discs were then subjected to prefabricated cracking, and crack propagation tests were conducted on a spin tester with two load spectrums. Crack growth behaviour was depicted via the surface replica technique and fracture morphology. Regarding the linear superposition of residual stress and centrifugal force, the crack propagation behaviour of different discs was simulated using the FRANC3D software. AJC and WQ introduced compressive residual stress (−259 MPa and −109 MPa, respectively) into the disc compared with the AC method (about −1.5 MPa). The AJC method increases the crack propagation life of the disc by introducing residual compressive stress into the area near the surface of the central hole to inhibit the opening of the crack surface. When the fatigue load was low, this inhibition effect was more significant.Keywords
Funding Information
- National Science and Technology Major Project of China (MJ-2020-D-08, LQ22E010005)
- Natural Science Foundation of Zhejiang Province (MJ-2020-D-08, LQ22E010005)
- Central Iron & Steel Research Institute and Hiro Aviation Technology Co., Ltd. (MJ-2020-D-08, LQ22E010005)
This publication has 40 references indexed in Scilit:
- Residual stress relaxation and low- and high-cycle fatigue behavior of shot-peened medium-carbon steelInternational Journal of Fatigue, 2013
- Quantifying microstructurally small fatigue crack growth in an aluminum alloy using a silicon-rubber replica methodInternational Journal of Fatigue, 2012
- Stress relaxation through ageing heat treatment – a comparison between in situ and ex situ neutron diffraction techniquesComptes Rendus. Physique, 2012
- Fatigue damage in aircraft structures, not wanted, but tolerated?International Journal of Fatigue, 2009
- Replica-based crack inspectionEngineering Fracture Mechanics, 2009
- A generalized Paris’ law for fatigue crack growthJournal of the Mechanics and Physics of Solids, 2006
- Neutron Diffraction Measurements of Residual Stresses in Engineering Materials and ComponentsJournal of the Society of Materials Science, Japan, 2002
- Laser shock processing and its effects on microstructure and properties of metal alloys: a reviewInternational Journal of Fatigue, 2002
- Extending the Fatigue Life of Aircraft Engine Components by Hole Cold Expansion TechnologyJournal of Engineering for Gas Turbines and Power, 1993
- Gas Turbine Engine Disk Retirement-for-Cause: An Application of Fracture Mechanics and NDEJournal of Engineering for Power, 1981